Hardware and Software products

Create, play, remix, then share your inventions with the world.

"Greenhouse Effect" is melting the Earth ice core every minute and creating dangerous icebergs.

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor.

This encoder is matched with 2wd miniQ Robot chassis.

Base Shield provides a simple way to connect with Arduino boards and help you get rid of breadboard and jumper wires.

Grove - GSR allows you to spot strong emotions by simply attaching two electrodes to two fingers on one hand.

The M5Stack SIM800L Module is a module with small SIM800L GSM/GPRS module.

a connected robot controller

mcGateway is a bridge between the mcModules and the cloud. It facilitates the movement of data between the modules/devices and the internet

MicroZed is a low-cost development board based on the Xilinx Zynq®-7000 All Programmable SoC.

RELAY is a unit that allows you to control large power loads with a light-current, safe, reliable power control system.

The Temperature Probe is an accurate, waterproof temperature sensor that connects directly to the extension port on the Modulo base.

The famous ultra low power MSP432 32-bit microcontrollers from Texas Instruments

Jetson TK1 is NVIDIA's embedded Linux development platform featuring a Tegra K1 SOC.

OpenLane is an automated open source RTL to GDSII flow

OpenScope MZ is a USB/WiFi oscilloscope with a Waveform Generator and Logic Analyzer.

2-Channel 1 amp Relay Shield for Particle Photon

4-Port Relay Board is a PHPoC smart expansion board for relays.

The Pi Adaptor connects to the Raspberry Pi’s 40 pin interface, breaking out selected pins for use with the MatesBUS.

The Pmod NAV uses a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and barometer to provide users with 10-DOF functiionality.

1000's of free games, with built-in game making tools—and it fits in Your Pocket.

Low-cost, highly accurate power measurement tool

Pubkeeper™ is a communications broker that enables a system of disparate devices and technologies to communicate with each other

The Push Button Kit allows you to trigger actions or control various appliances remotely.

Consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages

reTerminal is powered by a Raspberry Pi CM4 and a 5-inch IPS capacitive multi-touch screen with a resolution of 720 x 1280.

A long add-on board for the RFduino DIP module that supplies 3.3V to your whole project.

SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network.

The world's first AI watcher to help you monitor anomalies within a space and then take action accordingly. All based on voice commands.

Siri is a computer program that works as an intelligent personal assistant and knowledge navigator, part of Apple Inc.

Collect, store, and visualize data at any time, from any device connected with SORACOM Air

Half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project running safely and extensively.

The SparkFun Proximity Sensor Breakout is a simple IR presence and ambient light sensor utilizing the VCNL4040. This type of sensor is of...

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header

The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temp...

Description: The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 A...

The STM32 Nucleo-32 board (NUCLEO-F031K6, NUCLEO-F042K6, NUCLEO-F303K8, NUCLEO-L011K4, NUCLEO-L031K6, NUCLEO-L432KC) provides an affor...

A solar charger for single-cell LiPo batteries. Get the most possible power out of your solar panel or other photovoltaic device!

Arduino board with IoT connectivity for 3D gesture control, motion capture, tracking and vibration measurement.

TI's graphing handheld that enables a deeper understanding of abstract concepts in math and science subjects.

Measure light with your TinyDuino - this TinyShield approximates the human eye's response to light.

Measure real CO2 levels with our PAS CO2 Shield2Go

The ADP5250 brings higher sample rate and bandwidth and a more rugged design to the Analog Discovery Pro family

The Arty Z7-10 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx.

Fast, highly secure and programmable content delivery network (CDN)

A hosted queue for storing messages as they travel between computers, making it easy to build automated workflow between Web services.

Extra horsepower in BeagleBone Black form-factor, including more PRUs, audio/video accelerators, DSPs and AI accelerators

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is b...

Caravel is a standard SoC harness with resources (cpu, sram, interfaces) to control and read/write operations from a user-dedicated space.

Crazyradio PA is a long range open USB radio dongle based on the nRF24LU1+ from Nordic Semiconductor.

DBaaS TimeSeries by OVH.com is a Platform as Service tailored for the IoT market. A simple and robust service for storing your datas

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one BLE board, with a native-Bluetooth chip

This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.

The Grove - 3-Axis Digital Compass is a digital compass sensor based on Bosch BMM150.

It features an HP206C high-accuracy chip to detect barometric pressure, Altimeter and temperature.

Grove - Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects.

As the name indicate this shield is made for Arduino Nano, but it also can be used with Seeeduino Nano.

The Grove - Speaker is a module consist of power amplification and voice outputs.

The fastest growing segment in the industrial and OEM space in recent years