Hardware and Software products

Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield....

Audio Adaptor Boards for Teensy 3.x and Teensy 4.x

Temperature sensors for any need: Driving system efficiency through easy and accurate temperature monitoring

A sewable, Arduino-compatible module in an ultra compact package.

The Current Sensor 2GO is a budget-priced evaluation board equipped with a current sensor combined with an ARM Cortex-M0 CPU.

Several kinds of LED Strips have already been available in our bazaar for a long time, however, there were no Grove compatible LED strips.

The Wio Tracker (Wireless Input Output) is an open source gateway based on the ARM Cortex-M0+ and Arduino M0 MCU which enable faster IoT GPS

Pycom's tiny, updated, MicroPython-enabled, enterprise-grade Wi-Fi and Bluetooth IoT development platform.

Boost your industrial IoT solutions with a reliable and secure gateway for LoRaWAN® connectivity with deep indoor coverage.

FCC/CE Certificated ESP8266 Wifi Module

The RFID Card is a 13.56MHz RFID / NFC card with the M5Stack logo.

The CC110L RF BoosterPack is a low-power wireless transceiver extension kit for use with the TI MSP-EXP430G2 LaunchPad development kit.

Sharp® Memory LCD BoosterPack Plug-in Module is based on LS013B4DN04 display from Sharp Electronics with capacitive touch sliders.

The MR60BHA1 60GHz radar module applies FMCW detected theory to implement simultaneous personal breathing rate and heart rate detention in h

7inch HDMI/USB Display/Touch for UDOO X86

MULTIPLE LENGTHS. This precision trapezoidal (metric) lead screws pitch and diameter are a perfect combination of high torque and speed.

AC/DC Adapter for Power Module to drive digital LED strip and power relay.

Why would you need a 24-bit ADC? When 16-bit is just not enough. If you require high precision analog measurements, this gets the job done.

This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value

Yún Shield 101 is a powerful IoT shield that allows you to remotely upload sketches to your Arduino board.

Device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

The series uses the latest Core Independent Peripherals with low power features.

First BI Service with Pay-per-Session Pricing and ML Insights for everyone.

Instantly expose your device to the internet with a real SSL cert and a reverse proxy service.

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator.

Breakout for LinkIt Smart 7688 is a Grove port integrated expansion board for LinkItTM Smart 7688 development board.

The Raspberry Pi 3-based revision of the original Compute Module

The Coral Dev Board Micro is a microcontroller board with a dual-core MCU, Coral Edge TPU, camera, and microphone.

The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 APSoC.

This motor control shield is one of the first high current motor control boards being compatible to Arduino Uno formfactor boards

The development board based on the mid-tier Qualcomm® Snapdragon™ 410E processor

Erle-Brain 2 is a Linux-based artificial brain for making robots and drones with ROS support and based on the Raspberry Pi 2.

Everything you need pre-installed on the device - just plug in via USB and start writing JavaScript code immediately!

The IoT kit gets you started with amazing hands-on experience projects in the field of Internet of Things (IoT).

6-pin angled headers for Pmod and breadboard connectivity.

The VL53L3CX is the latest Time-of-Flight (ToF) product from STMicroelectronics and embeds ST’s third-generation FlightSense technology. 

Proto Board is compatible with products of FireBeetle series. There are 14×7 general 2.54mm solder holes in the board of standard spacing.

Gateblu allows you to connect smart devices, motors, servos, sensors, and additional protocols to Meshblu and Octoblu!

Connect your Tessel anywhere with GPRS/prepaid unlocked SIM card support! Texting and phone calls supported. Ships with one U.FL antenna.

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system.

An analog output pH monitoring meter kit.

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage

More cost-effective monochrome backlight derivative for you, i.e.,

The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331.

The Grove Base Hat for Raspberry Pi provide Digital/Analog/I2C/PWM/UART port to meet all your needs.

The Grove - CO2 Sensor module is infrared CO2 sensor high sensitivity and high resolution.

Grove - Electromagnet can shuck 1kg weight and hold on.It is easy to use and also easy to learn the electromagnetic principle.

Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of loc

The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers.

There are only two weeks away from Valentine‘s Day! We've specially prepared a demo using Red LED matrix and full step-by-step tutorial to l

The Grove - Variable Color LED is an RGB LED that can be controlled by both digital and PWM signal, there are three changable resistors on b

The H-Bridge Kit 2GO is a ready to use evaluation kit.

A high-resolution 8", IPS, 1024x768 display with HDMI driver board and keypad - perfect for building into projects like arcade cabinets!

A standardized software and hardware infrastructure to create modular robot hardware.

Husarion cloud allows you to control, program and share robots.

The EVAL SHNBV01 is a sensor board with Infineon's DPS310 barometric pressure sensor and Bluetooth 4.0

Intel® NUC kit features a customizable board and chassis that are ready to accept a wide variety of memory, storage, and operating systems.

Toradex Iris Carrier Board for the Colibri family modules

A multi-user version of the notebook designed for companies, classrooms and research labs

RosBot Baseboard is based on Arduino UNO and has 2 dual on-board H-bridge motor drivers.