Zolertia
Welcome to the Zolertia community! Join to share projects and receive help.

Z1 is equipped with a second generation MSP430F2617 low power microcontroller, which features a powerful 16-bit RISC CPU @16MHz clock speed, built-in clock factory calibration, 8KB RAM and a 92KB Flash memory. Also includes the well known CC2420 transceiver, IEEE 802.15.4 compliant, which operates at 2.4GHz with an effective data rate of 250Kbps. Z1 hardware selection guarantees the maximum efficience and robustness with low energy cost.

  • Ultra-Low Power MCU and 2.4GHz Transceiver
  • 2 x Digital Built-in sensors (temperature and 3-axis accelerometer)
  • USB Programming Ready
  • Flexible Powering: Battery Pack (2xAA or 2xAAA), Coin Cell (up to 3.6V), USB Powered, Directly Connected through two wires comming from a power source. USB VCC and GND pins are available on the digital buses expansion port. You can connect to this pins any power of source from 4V to 5.25V and it will be regulated to 5V and 3V.
Zolertia IPv6/6LoWPAN Ubidots client
  • 4,334
  • 13

Full instructions

A Zolertia Z1 6LoWPAN/IPv6 ultra low-power mesh network sending POST requests to Ubidots

Hacking a Solar Eclipse
Easy
  • 414
  • 5

Full instructions

Improvised hacking with a solar pannel to measure the Solar Eclipse on March 20th, at the ICTP IoT Workshop 2015.

Simple IEEE 802.15.4 2.4GHz spectrum analyser
  • 1,100
  • 7

Full instructions

Simple IEEE 802.15.4 2.4GHz spectrum analyser with Zolertia Z1 motes and Contiki OS

Sign up / LoginProjectsPlatformsTopicsContestsLiveAppsBetaFree StoreBlog