UV Robot - Tatag - Smart robot, no need to program it

The aim of this robot is:

• Low cost
• Can be operated by anyone
• Easy to manufacture
• Off the shelf components
• No programming needed

So we offer the following features for our robot:

• No need to program the robot, operator will drag the robot around the required path from closest point to the mains plug to the furthest away, then Tatagrobot will re-trace it back while turning on the UVC tube.
• No batteries needed, wall powered.
• Cable tensioner system to make the wire can follow Tataganywhere in the room.
• Safety feature: ultrasonic obstacle detection, PIR human detection.
• No need for SLAM or any complex navigation.

To make the robot able to do the job, we equip it with:

• Auto-retractor, make the cable always straight.
• A telescopic pole, hold itself between floor and ceiling, to keep the cable in tension. The height can be adjusted.
• 4 motorised 10” mecanum wheels, can move all directions.
• Philips TUV 75W HO 1SL/6 x 4 = 300W for optimum UV light to kill the virus.

To see how it works: https://youtu.be/iOj7ue32Khk