Published January 17, 2017 © GPL3+

RPiZero 3D print controller with OctoPrint

Using a Raspberry Pi Zero, the Zero4U USB shield, and a 3D printed case makes for the most compact OctoPrint server.

IntermediateShowcase (no instructions)2 hours130

Things used in this project

Adafruit Zero4U

EDIMAX USB WiFi

You can substitute any Raspberry Pi compatible USB WiFi adapter.

Zero4u 1.3 + Raspberry Pi Zero1.3 case with/without GPIO cut out

3D print this yourself

Octopi

2 projects • 10 followers

3D Print aficionado and budding Arduino and Raspberry Pi project builder