WannaDuino
Published © GPL3+

VU Meter on Steroids: Arduino Nano and NeoPixel WS2812B

Responds to sound or can be set on automatic, all by IR. Or switch. WS2812B VU Bar on Uno or Nano. CHECK MY OTHER VU PROJECTS. And Builds.

IntermediateWork in progress32,984

Things used in this project

Story

Read more

Schematics

Schematic picture and in code is the schematic for pinouts

in the code is everything explained on which pin you need to put the wires.
Pin 6 is for the WS2812B input ( + 5V 3 Amps EXTERNALY and common ground.
Pin 4 is the Switch or IR sensor ( and to ground of course )
Pin A5 is the Mic sensor.

VU on Nano fritzing schematic

wire diagram on breadboard made BY ME.

Vu on Nano FRITZING schematic

FRITZING file breadboard schematic wire diagram made by ME

Code

CODE V3 VU METER

C/C++
/ LINK TO CODE TO THE VU METER v3,https://drive.google.com/open?id=1Ce8L6X37-WlCsaoLpPVPufwbDxHftrkN

WANNA HAVE THE CODE? JUST ASK... OPEN SOURCE

C/C++
No preview (download only).

Credits

WannaDuino

WannaDuino

5 projects • 66 followers
Life in Monaco ( Ville Monaco Monte Carlo Europe ) and in the Netherlands WWW.WANNADUINO.COM or YouTube.com/c/WannaDIY OPEN-SOURCE > THE WAY
Thanks to the credits are gone, go to the man with NO NAME thanx to himself and Davos ( my Dutch buddy ).

Comments