vicente zavala
Published © MIT

Industrial IOT WiFi CNC

Industrial Internet of Things WiFi Portable CNC Plasma Cutter.

ExpertProtip352
Industrial IOT WiFi CNC

Things used in this project

Story

Read more

Schematics

CNC

Code

Untitled file

Arduino
#include "WiFi.h"
#include "AsyncUDP.h"

const char * ssid = "***********";
const char * password = "***********";

AsyncUDP udp;

void setup()
{
    Serial.begin(115200);
    WiFi.mode(WIFI_STA);
    WiFi.begin(ssid, password);
    if (WiFi.waitForConnectResult() != WL_CONNECTED) {
        Serial.println("WiFi Failed");
        while(1) {
            delay(1000);
        }
    }
    if(udp.connect(IPAddress(192,168,1,80), 4444)) {
        Serial.println("UDP connected");
        udp.onPacket([](AsyncUDPPacket packet) {
            Serial.print("UDP Packet Type: ");
            Serial.print(packet.isBroadcast()?"Broadcast":packet.isMulticast()?"Multicast":"Unicast");
            Serial.print(", From: ");
            Serial.print(packet.remoteIP());
            Serial.print(":");
            Serial.print(packet.remotePort());
            Serial.print(", To: ");
            Serial.print(packet.localIP());
            Serial.print(":");
            Serial.print(packet.localPort());
            Serial.print(", Length: ");
            Serial.print(packet.length());
            Serial.print(", Data: ");
            Serial.write(packet.data(), packet.length());
            Serial.println();
            //reply to the client
            packet.printf("Got %u bytes of data", packet.length());
        });
        //Send unicast
        udp.print("Hello Server!");
    }
}

void loop()
{
    delay(1000);
    //Send broadcast on port 1234
    udp.broadcastTo("Anyone here?", 1234);
}

Credits

vicente zavala

vicente zavala

10 projects • 21 followers
Freelance Programmer, Internet Of Things (IOT), CNC Plasma Cutting Creator, AI, DL, ML, Hardware Software Hacker.

Comments