Battery Fire Detection

/* 
 * Project HeDetSys
 * Author: Steve Lunneborg
 * Date: 07/09/26
 * For comprehensive documentation and examples, please visit:
 * https://docs.particle.io/firmware/best-practices/firmware-template/
 */

// Include Particle Device OS APIs
#include "Particle.h"
#include "IoTClassroom_CNM.h"
#include "Adafruit_SSD1306.h"
#include "Adafruit_BME280.h"

SYSTEM_MODE(MANUAL);

float tempC;
float tempF;
const int BMEADDR = 0x76;
const int BUTTPIN =
const int OLED_RESET=-1;
unsigned int lastPrint;
unsigned int printInterval = 2000;

bool alarmOn = false;

Adafruit_BME280 bme; 
Adafruit_SSD1306 display(OLED_RESET);
Button myButton(BUTTONPIN);


SYSTEM_THREAD(ENABLED);

void setup() {
  Serial.begin(9600);
  waitFor(Serial.isConnected,15000);



  WiFi.on();
  WiFi.clearCredentials();
  WiFi.setCredentials("IoTNetwork");
  
  WiFi.connect();
  while(!WiFi.ready()) {
    Serial.printf(".");
    delay(250);
  }
  Serial.printf("\n\n");


  if (!bme.begin(BMEADDR)) {
        Serial.printf("Could not find a valid BME280 sensor");
/* in void loop every so often get a reading from the bme readings with if tempf is above (blank) and below(blank) your oled display what range your're in (safe, warnig, danger)
automatic mode if */    
    }
  display.begin(SSD1306_SWITCHCAOVCC, 0x3C);

  display.display();
  delay(2000);
  display.clearDisplay():

  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0,0);
  display.printf("Alarm ready/n");
  display.clearDisplay();
  display.display();



}

void loop() {
  

  if ((millis() - lastprint) > printInterval){  //timer for stuff, variables must be differnt 
    tempC = bme.readTemperature():
    tempf = tempC  * (9.0/5.0) =32;
    Serial.printf("Temp:%.01f\n", tempF);
    lastPrint = millis();
    if(tempF >=){
      alarmOn = true;
    if (temp F <=){
      alarmOn = false;
      
    }
    if(Tempf)
  }