Revamping a robot arm design & writing fresh, multiplatform code to give it as much functionality as possible for use in disabled travel.
A WiFi configuration service is set up on the Ameba Bluetooth stack.
In this tutorial, we will learn how to install multiple versions of the ESP32 board package in the Arduino IDE.
Humidity Guardian: An automated system that monitors and controls indoor humidity, activating fans when levels exceed a set threshold.
A Quick Assembly Guide
Future PC designs will be inspired by Raspberry Pi 5 and other SBCs.
By using the cheapest esp32 boards, we can have a serial console to recover a remote Raspberry instead of using a more expensive KVM.
Controlling a rover using simulated Spiking Neural Networks (SNNs) instead of traditional algorithmic logic.
This is a project about ESP32 and Audio how to be used in weather broadcasting.
Log and LightStream sample data (in-built files) using ESP32 Xtensa Board with the Golioth IoT Cloud
This is UWB radar sensor based oneM2M IOT detection and notification service
Feasycom focuses on the research and development of IoT (internet of things) products, including Bluetooth Modules, WiFi Modules, Beacons,
Is your garage door closed? Turn a cheap smart lightbulb into a cloud-powered door sensor and never worry again.
A design without implementation for open-source wireless command of a rover with a haptic interface, based on the CapSense technology.
An automated lamp made with Bolt IoT module. It uses Arduino Nano, HCSR04 and Bolt wifi module.
Turn the M5Stack Dial into a Bluetooth volume knob, timer, and pomodoro, all in a slick cyberpunk HUD. Built with PlatformIO + Arduino.
Impulse Edge data forwarding for air (wi-fi/tcp)
An innovative device which checks if the user is on the laptop in their usual sleeping time and if so, beeps till they go to sleep
An add on for any 3D printer running Marlin (or similar firmware with standard GCode commands) to connect it to a smart home network.
You can rotate the fan left and right, tilt it up and down, control the fan and rotation speed, and set start and end positions of rotation.
Life would be easier if we could control everything from a smartphone screen. Luckily, it’s not a big deal to make it happen.
Can Viruses, Trojans and Malware destroy your Raspberry Pi 5 as fast as a classic PC?!
A movable platform with Home Assistant.
IPEM NBIoT | ESP32C5 ATM90E36 SIM7070G GPRS IoT Mains Power Energy Monitor
