Identical solar boxes, one Bluetooth network, no cloud: they learn what is normal, find leaks, warn before pipes fail, flag frost and mildew
AquaSentinel warns you before water systems fail: it spots leaks and failing pumps early and rations scarce water fairly.
An Edge-AI sensor that learns an aerator's healthy rhythm and warns over Bluetooth days before it fails and the fish suffocate.
We built a solar-powered water tank monitor using M5Stack C6L and Meshtastic to send alerts when water runs low.
WaterLens combines four water sensors, Arduino UNO Q and local Edge AI to recognize patterns and flag changes from a tap-water reference.
Most leak alarms stay silent when the probe wire breaks. This one uses an end-of-line resistor to tell dry, wet and unplugged apart.
A small low power node that clamps onto an existing water pipe, listens to its vibration, and uses a tiny ML model on the nRF54LM20 to flag
Water quality, anywhere, anytime!
This video will illustrate the working principle of the Water Quality Monitoring and Notification System.
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.
Measure the water consumption in your house with a Particle and water flow sensors.
Send flow rate measurements to the cloud and monitor them in real-time with Soracom Harvest and AWS IoT.
This article describes the design process, development and assembling operation of the underwater drone prototype powered by Raspberry Pi.
Build your own high-quality water sensor to monitor your pool or spa.
Tracking whales in cape cod using underwater vocalizations!
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
Tracking the tides and weather at your favorite beach.
Feel Bored while Monitoring water tanks in our Houses to avoid overflow and wastage of water? This Simple project can solve these Problems.
Get notified of a water leak wherever you are
Monitor and control a reverse osmosis system for your reef or house water purification.
Are you looking to control your tank water level automatically here's the post for you, how can water level be controlled automatically?
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS.
