Probably the most useful Arduino project I've ever made! A automatic tester for a product I sell.
Useful tool for testing, and determining characteristics of LEDs, as well as a calculator for calculating the series resistor.
Creating a simple oscilloscope with the Basys3 board
Servo!!! The motor for Robots
With a few lines of code we were able to quadruple the sample rate and bandwidth of our RP2040 based oscilloscope. We show you how.
Test all electronic components with Component Tester UNO Shield.
Component Tester (V-I Curve Tracer) Using The Oscilloscope XY Mode
Are you tired of fumbling with multiple tools just to check LEDs and test circuit continuity?
Libraries to implement a variable frequency generator and frequency counter for Pro Micro and Leonardo
I tried to construct as simple as Ion Plasma Thruster that does not require 3D printed and other precise parts.
This project walks through basic RF testing for hardware/software verification of SDRs on the Ettus B205mini USRP.
Learn how to build your own lab power supply, decade box, function generator and oscilloscope.
Build a circuit that will quickly test AA, AAA, 9 volt and coin cell batteries.
A minimal, powerful, robust tool for electronics component measurement with auto component detect function.
This project walks through basic RF test measurements using the Zmod Digitizer with WaveForms from Digilent.
Electronics is fun, testing is fun, let's make it funnier with a Regulator tester with Faces! :)
This project walks through how to use a Zmod Digitizer with WaveForms to make measurements that validate basic modulation schemes.
This project walks through how to measure spurious outputs from a DDS chip to gauge the amount of quantization error of it.
A Demonstration of (UI) user Input Interface for Fully Enclosed Waterproof/Underwater equipment with Infineon 3D Magnetic and Hall Sensor
A walk through of how to measure the current with an oscilloscope in WaveForms using a current viewing resistor (CVR).
A PCB designed Tester to check the continuity of the circuit and polarity of components.
Assemble test stand for checking power consumption of SDRAM in different operating modes.
