Improved version of the soldering iron controller for Hakko 907 iron. To simplify building the controller, LCD screen is implemented.
The soldering iron controller based on arduino that implements PID method to keep the temperature of the iron.
Just plug the device with an SD card inside into any USB port. It creates an FTP server where we can send and receive data to the SD card.
Hack a cheap smoke detector to automatically extract smoke, carbon monoxide and solder fumes!
Terminator's Skynet comes alive in the form of a badge.
Use some copper tape and Bare Conductive's Electric Paint to light up a few 5mm LEDs. No soldering required!
A guide on proper PCB bring-up. Avoid pitfalls and issues and speed up the process with some hacks!
Taking a safe side, using low DC voltage in high power mode we can design a suitable hot plate for our SMT projects.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
A powerful, stable and highly effective soldering iron. Do soldering in a new way with red hot color of tip.
Got an old Gameboy cartridge that is no longer saving or keeping time? It's probably the battery! Change it!
Surface mount soldering isn't as difficult as you think it is. Test out your skills with one of these SMD Challenge boards.
With an Arduino, a PC fan, and an LED strip, you can make a simple fume extractor that will keep you safe from the fumes from soldering.
An artistic badge based on Digispark and design inspirations from Captain Jack Sparrow and Barbossa.
Easily turn your kitchen toaster oven into a hobbyist's reflow soldering oven.
Cheap and effective solder fume extractor, using waste cpu cooling fans
An SMD reflow oven heater and insulator part.
Do you live in constant fear of your robot being stranded as it gets you Taco Bell all because it’s motor became disconnected? Fear no more!
Turning a laser engraver into a precise soldering tool — reflowing SMD parts with Xtool F1 Ultra.
An Air Quality Logger Created using BalenaFin
A portable suction system to pick and place SMD components.
Talking about electronics this tutorial will take us back to one of the basics which is how to master the through-hole soldering.
Make a real PCB directly from your TinkerCad design with Bread2Board - no wiring, no waiting for a PCB service.
This project converts a spare Tevo Tarantula heated bed into a standalone PCB preheater using an MKS Base v1.4 (Merlin) board.
