The most dangerous workplace exposures often go unnoticed. The PPES makes them visible and ensures you stay protected.
Safety Bot is an AI-powered inspection rover especially designed to monitor hazardous working environments.
Project using Arduino Micro and a CC1101 to receive and display the tyre pressures transmitted by a Toyota (Auris Hybrid) and some others
Predict worker–forklift collisions 1–3 s ahead at the edge with oneM2M and ETSI MEC, and tell each worker exactly what to do.
Intelligent battery monitoring platform built to identify early signs of degradation and abnormal behavior before develop critical failures.
A small device that uses the MAX32620FTHR to detect hackers over a WiFi network.
NRA allows us, in case of bike accident, to locate the injured person through the Sigfox network. It also improves visibility on the road.
A cool timer gadget to teach your kids about washing hands for twenty seconds.
Using an Adafruit compass/accelerometer and an 80-decibel alarm, this project prevents thieves from stealing your backpack.
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Easily measure air quality, avoid polluted areas, and improve your health and that of your community.
Set up a Raspberry Pi to graph and monitor air quality with InfluxDB and Grafana.
Run a service to start and safe shutdown Pi boards using a momentary push-button switch.
To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.
Sleeping on wheels is dangerous sometimes it may converts into fettle accidents. these glasses will alert you when you feeling drowsiness.
Build a simple industrial safety monitoring system using ESP8266 and multiple sensors, with real-time data shown on a KiwisIoT dashboard.
How to make social distancing warner device with Arduino uno, Ultrasonic sensor, Buzzzer
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
Arduino, NeoPixels, Firmata, and a Windows Phone (picked one up for $30 bucks) to control lighting.
Cabs4Cabs: Consolidated Arduino Based Sureveillance for Cabs.
My project is to the alarm the people that there is a fire in the building and a lighted gate that tells the people to exit from that gate
This system will help prevent accidents caused by drunk driving.
The "I'm Fine" project is about monitoring the well being of especially lonely elderly people, who may not have daily contact to the family.
A pair of Bluetooth connected flower brooches sends alert to mother when the child is out of proximity. When close by, both light up.
