Unleash the power of your ESP32-S3 with Zephyr RTOS using a pre-configured, high-performance project template for VS Code.
A Water level monitor with oled display display the percentage of bucket filled
This article is about how Wireless Microphone works. This is a firmware project Arduino source code.ino for ESP8266 ESP32 WiFi modules...
In this tutorial we will learn how to control the Neopixel Led Ring Ws2812 using Arduino and Visuino to run the LED pixel around.
Using the NXP i. MX 8M Mini Vision development board to develop a simple QR scan app, we can prototype contactless delivery via drone.
Medicine alarm for Patient
A 4WD Robot which deactivates pathogens including COVID-19 utilizing UVC light from a surface.
This is data communication over Bluetooth radio, the interface theory and operation of a Bluetooth module, and UART communication.
Skynet is a lightweight command line interface for LLMs to control real robots and drones using Bash.
An autonomous rover that can survey a field, map and measure soil quality indicators like pH, humidity, nitrogen content, etc...
Today during this text we are becoming to form a LED Flasher circuit with a Relay. this is often a simple circuit.
Electromyography (EMG) measures muscle response or electrical activity in response to a nerve’s stimulation of the muscle. The test is used
6 Years of My 3D Printing of Humanoid Robots Project or My adventures in additive manufacturing.
This project will show you how to randomly trigger up to 12 servos using Arduino code.
Add up to six ultrasonic sensors to your robot.
This code uses the micro bit's radio ability to send and receive number via radio.
Discover the best live-streaming options for the Raspberry Pi 5. I will test a video live-stream latency and pick the best from the list.
SLAM, ADAS-CAS, Sensor Fusion, Touch-less Attendance, Elderly Assist, Gesture Cam, Security Cam & Monocular Depth with OpenVINO, Math & RPi
I stumbled upon this Tank vehicle while searching for another project. Very similar to the Devastator Robot with a better IO board
Get real-time visual feedback on how your quadcopter or RC airplane is flying. Great for nighttime or low visibility flights.
One self balancing artifact that by using a TFT shows the angle of the inverted pendulum implemented with this device. 3 arduino one used.
Autonomous mouse that can traverse any 16 by 16 maze.
DIY Roomba Wall based on ATtiny85. This is powered by 3 AA batteries (alkaline or NiMH), which is able to keep it powered for many months.
The robot tank learned to follow unmarked walkway using OpenCV and TensorFlow.
