This project demonstrates how to build a rain detection system using an Arduino microcontroller.
Fall 2022 ME 461 Computer Control of Mechanical Systems Final Project. Robot car candy launcher with candy refill station. TI F38279D.
To blink onboard LED using HAL programming on software STM32 CubeIDE
A mechanical reeling mechanism to pull down door handles and unlock them. Complete with full wireless capabilities for triggering remotely.
In this lesson, you'll understand how the LM35 temperature sensor works and build a cool project with it.
In this tutorial we will use Servo Motor and ATOM Matrix ESP32, and Visuino to control servo motor degree position. Watch the video!
This tutorial will teach you to use Magicblocks Dashboard Widgets with your Magicbit.
In this lesson, we explore two essential electronic components: relays and transistors.
In this tutorial, we will learn how ultrasonic sensors work and build a complete distance measurement system.
Its a pen holder equipped with programmable display.
A dustbin, which is smart enough to segregate waste based on if material is metallic, non-metallic, dry or wet.
We will use a quadcopter/drone as a reusable vehicle for weather balloon radiosonde equipment while taking meteorological data.
"Custom PCB featuring RFID RC522, Arduino Uno, LEDs, and resistors—compact, efficient, and ready for innovation!"
This project will describe how to play a song/music on the buzzer mounted to the breadboard on the Lily∞Bot programmed in MicroPython.
12v to 5v convertor
In this tutorial, you'll create a video game controller that mimicks a steering wheel, to play a car game made with Unity!
In this tutorial we are going to control a stepper motor Nema 17 by using a Custom Code component in Visuino Pro.
Here in this ARTICLE, l am going to make a simple Arduino Bluetooth-controlled robot car. Though I have made several Arduino robot cars
A robot that can move objects with voice commands from android by setting the speed of movement based on the dimensions of the object to be
George Lucas created a world that has no end—as long as you're open and want to enjoy the ride.
I built a Hybrid Delta Robot using Arduino & Servo motors. Delta robots are widely used in factories for high-speed pick and place operation
A design without implementation for open-source wireless command of a rover with a haptic interface, based on the CapSense technology.
Build a smart sorter with YOLO11 and ROS 2! ArmPi Ultra blends 3D vision and LLMs for a robot that understands intent & sorts in real-time.
This project blinks an LED on an STM32 microcontroller using pure bare-metal programming by directly configuring registers.
