Arduino-based dice throwing and coin flipping simulator with 3D-printed enclosure
ESP32 + OLED in a 3D printed DIN case polling a Shelly EM on the LAN, no Home Assistant: watts, voltage, kWh history, siren, web UI.
The NU40 DK renders a Doom-style 3D world by itself at 24 FPS on a 128x64 OLED, playable with its 4 buttons.
ESP32 and 1.3in OLED in a 3D printed 4-module DIN case: live watts from Home Assistant, kWh history, overload siren, web UI, OTA.
Play a song on your Mac and the NU40 DK's OLED shows the current lyric line and bouncing music bars, or a figure copying your dance.
A Python script fetches stock prices and an NU40 DK shows price, % change and a mini chart on a 0.96" OLED, with LED alerts on drops.
A 3D printable case for an Adafruit Monster Eye with an industrial flair!
Build a live train departure display for your desk with a Raspberry Pi Zero W and OLED screen.
What's scarier than a pair of Uncanny Eyes? Five pairs of Uncanny Eyes mounted on skulls and controllable to make everyone scream.
Create an OLED screen that shows the date, time in digital and analog format, temperature and humidity.
Test transistors, diodes, thyristors, resistors, capacitors and inductors. Also identify their leads and obtain their component value.
Pick the time from a DCF77 radio signal and show it on an OLED display.
The project I want to share with you today is an Arduino maze game, which became a pocket console as capable as Arduboy!
A programmable, portable, rechargeable power supply based on Arduino featuring an OLED display for viewing V.I.P. of projects/prototypes.
This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result
Arduino and OLED based Cellular Automata aka Game Of Life
A SMD Hot Plate made from a Printed Circuit Board. It has multiple heat profiles and is capable of reaching over 220 degrees Celsius.
SS1306 OLED I2C nanoFramework driver for 128x64, 128x32, 64x48, 96x16
How to build an humidity and temperature meter with time display from an old voltage meter casing.
An interesting clock that will appeal to those gamers that grew up on retro games like Pong, Pacman and Tetris.
Say hello to Otto β a cute, programmable robot that I built completely from scratch using 3D-printed parts with a Wemos D1 board.
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
An SSD 1306 OLED display eye.
