Arduino project to detect lightnings using electromagnetic radiation with frequencies from 7-9kHz.
Build your own lightning detector that's smaller, more customizable, and cheaper than a commercial one!
I really wanted to make a little cloud that would light up as though it was filled with lightning.
Simple to build Mini Tesla coil with relatively low consumption, and surprisingly good results.
How to make a sensitive homemade lightning detector based on cheap AM receiver IC TA7642 and Arduino Nano.
Step-by-step instructions to make your own Touch Lamp.
A personal storm warning device with realtime lightning detection, and GPS-based weather alerts to keep you safe as you walk, hike, or bike!
Simple to build, but powerful system for continuous monitoring of electrical discharges (lightning)
Avoid severe lightning injuries to electronic equipment and prevent extreme weather phenomenon.
Forget boring old snowglobes, and build a swirling storm using magnetic stirring and LED lightning effects.
In this project, we show how to integrate a Sonoff with Thinger. io and how to wire it up to create a simple IoT lamp for less than $10.
A LED strip development multipurpose module
SSTC based on LabCoatz version, with adjustable Schmitt trigger oscillator.
Simple to build, but serious instrument for monitoring and predicting weather disasters.
In this example, you will connect a NeoPixel matrix to a Pi Pico board. In this online Pi Pico simulator, NeoPixel Ring.
Easy DIY build using 3D printed components, a RGB LED light strip, and wood veneer.
Connect the AS3935 to the cloud through the Sensor Builder and Sensor Data Logger
Simplest type of Tesla Coil that produces high-voltage, low-current, and high-frequency alternating-current electricity.
Turn this small, cheap, and almost non-functional device into a real Tesla coil that generates a sparks with a length of several centimeter
If an object on a photographic plate is connected to a high-voltage source, an image is produced on the photographic plate.
Tesla Coil design made with only one Vacuum Tube and a few passive elements powered by MOT Transformer.
Alternatives to the Neon Sign transformers are microwave oven transformers (MOT), because they are universally available.
This is a relatively cheap complete Tesla coil driver, so we only need a primary and secondary coil to build functional Tesla coil.
Blitz-O-shield: Arduino Nano shield for thunderstorms and the (usually) associated lightning detection
