We can directly plug this module into breadboard and supply different voltages as our project needs.
A weekend project for control some devices via SMS.
I am going to make 8x8x8 Led Cube in PCB
Multisensory feedback with biometric input. Tons o' LEDs.
Nordic thingy:53 has built-in a RGB led but addition of Neopixels in shape of array or strip can make any thingy:53 project eye catching.
Upgrade your SMARS Robot with OLED, RGB LEDs, and a buzzer! Follow my guide for circuit design, 3D printing, and custom Android app control.
In this project we will learn how to display a random color on the NeoPixels LED Ring using a M5StickC ESP32 board. Watch the Video.
This Project is use for controlling led brightness or any pwm control via UDP packet sending through Android Application.
A gesture-controlled Magic Staff Stick that lights up with different styles when you make certain gestures.
In this project, we have designed a touch sensor that powers LED when the test point terminals are touched with a finger.
Use Meadow. Foundation to quickly and easily wire up a Capacitive soil moisture sensor, and graph it using an LED bar graph.
WisBlock is a modular approach solution developed by RAK Wireless to build IoT solutions by adding blocks together.
In this lesson, you will install the Arduino IDE, and use it for the very first time to upload your first example sketch.
A low-cost disinfectant robot that is easy to operate, help control the increase of coronavirus cases and prevent harm to others.
You will learn how to build your treasure hunt game with Arduino.
USB Using MK20DX128
Offline voice keyword detector using ESP32-S3, INMP441 & MAX7219. Powered by Edge Impulse, no cloud needed, runs fully on-device.
A basic project that describes the use and function of a capacitor in the electronic field.
Wokwi Arduino Simulator is used to show you the application of shift registers to read the status of 32 switches using 4 shift registers
Control the blinking action of an LED using an IR receiver and a remote control.
In this tutorial, I'll first blink "an LED" using the positive pulse generated by a "DIY 555 Pulse Generator Module", followed by "two LEDs
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
LED1 double flash than LED2 double flash, speed between LED1 and LED2 adjustable by POT.
Look the results!!
