NodeMCU ESP8266 board which monitors the soil moisture of your plants and notifies you on Telegram when they need to be watered!
Build your own automatic IoT plant irrigation system with soil sensor, Particle Photon, relay and immersible water motor.
The Smart plant allows you to automate the watering of your plant with the particle Argon while measuring room and soil conditions
The water level indicator is the best electronic starter device indicating the water level and saves water correspondingly.
This project is about IoT-based smart irrigation in which we use soil moisture sensors and nodemcu.
In this tutorial, you can learn How to build an Arduino Water Detector Alarm step by step complete process.
Sprinqua turns any Raspberry Pi into a smart irrigation controller — schedules, rain skipping, Home Assistant, no cloud, no subscription.
Continuously monitors the soil moisture level and based on the reading turns ON/OFF the submersible pump to maintain the water level.
Using M5Stack to water a plant and report soil moisture, humidity and temperature. Supports Home Assistant and its MQTT Discovery.
A project to easier their work or even finish their work
An initial phase of remote irrigation system with raspberry B+. It has already been upgraded with cloud controlled ESP8266.
This is a Plant Irrigation system designed using Raspberry pi, Soil Sensors, Water Pump and some basic circuitry can be operated by webpage
In this project I use a our device to create a simple irrigations system This system watering your plants, you can be defined all thresholds
Fed up of forgetting to water your plants every day? Build this project and never worry about doing it again.
A new season and new features are required.
The project consists of turn on/off a mini pump on scheduled days, allowing the resident to leave without worrying who will wet the plants.
Soil Monitoring And Irrigation with Lora, suitable for "Farm automatic" or "smart agriculture".
I got tired of forgetting to water my plants, so I built a Wi-Fi-enabled smart plant watering hub using a Raspberry Pi Pico W.
Our project is designed for monitoring humidity, temperature, and moisture levels, with the added capability of regulating soil moisture.
Irrigate your garden automatically on a timed schedule, powered by solar energy (and a battery).
Based on agriculture farm temperature conditions the motor pump will run and pump water to plants
Modern agriculture is heading towards automation nowadays. In this project, we will make an Agri monitoring and irrigation system.
Never let your plants die again! This smart irrigation system waters your plants automatically based on soil data and plant type.
A easy DIY solution to prevent water overflows. This unit monitor floater switches and trigger an alarm when water levels rise unexpectedly.
