Applying IoT technologies to revive an old SCADA telemetry system.
The article flow on how to setup interfaces as eMMC/SD in KD240 and custom carrier for K24 SoM.
Buto is my 'real steel' robot project. Now, BuTO has been connected to the Internet and can be controlled remotely.
Measure the flow rate through a pipe and use machine learning to determine if a clog has formed.
4 ea. 4-20mA IN/OUT, 4 ea 0-10V IN/OUT, 4 ea. Opto-isolated IN/OUT, 4 ea 250V/10A relays, RS485, CAN, 1Wire. All for $50.
Equip your production lines with a predictive maintenance solution for real-time monitoring of asset conditions and performance. 📈
Employing machine learning to the sensors and signal data is making the devices smarter than ever. Get started with ML and Azure.
Want to go hands on with LoRa and don't know what to buy? I think this is the best LoRa Starter Kit on the market right now.
Detect hard hats using the Edge Impulse Linux SDK on MaaXBoard Mini.
An IoT platform based on the ATmega328p designed to acquire data using industrial standard 4-20mA sensors and MODBUS protocol.
How to apply tinyML approach to detect broken tooth conditions in the gearbox based upon recorded vibration data.
120/240V AC or 30V DC power supply module for the Sony Spresense Expansion Board. Plug and power your projects for real world.
Get up and running with this kit, based on Qualcomm's powerful edge AI processor QCS6490
The thingSoC ESP32S is an open source hardware project for the ESP32S, a radio module from Espressif.
The robot has been developed and programmed by IC 4093 control. Designed to move independently and avoid obstacles. Operating on 3V only.
Arduino-powered Modbus/TCP device server: 8 digital output relay, 8 digital input with photocoupler. It supports both WiFi and Ethernet.
Configuring Node-RED for usage with and our RS485 HAT on a Raspberry Pi.
Automatic FOMO-based objects counting using computer vision and a web app.
Here we are going to make a counter system using IoT and an IR sensor which is used to count the object/obstacle.
How to send data from a 4zerobox (based on ESP32 and Python programmable using Zerynth) to The Things Network via a Microchip LoRa module
It uses LDR to sense light intensity and LEDs to vary light intensity. It uses arduino as controller and LCD to display light intensity.
An ESP8266-based, wall-mounted thermostat with touchscreen and Modbus support.
Often web server access to remote devices behind a firewall is needed (Wifi router, smart home). SSH port forwarding solves this.
Read and write to multiple Modbus RTU slaves from the cloud through serial communication using WolkAbout IoT Platform.
