Wheelchair whose motion can be controlled using simple hand gestures.
Learn how to read Gyroscope Sensor on Arduino 101 and show tilt status on LED.
This Robot balances itself and can also withstand the weight of glass of water! how cool is that?!
This demo shows an example of how to use machine learning in a decision tree concept, programmed into a smart $2 LSM6DSOX sensor.
Visualizing the gyroscope data MPU6050.
I am controlling my asphalt 8 game using my old upgraded bicycle. So let's see how it works
Fibonacci64 Micro 40mm disc with 64 RGB LEDs driven with a XIAO BLE Sense from Seeed Studio, using the 6-axis IMU to "open & close".
Arduino Nano & 3-axis MEMS sensor (MPU-6050) takes real-time motion data and controls an orientation of virtual 3D cube in Processing IDE.
Out with the tilt indicator stickers, in with proactive notifications and tracking.
Arduino with MPU6050.
Supercharge your Crowbot with voice commands and tilt control for next-level robotic awesomeness 🚀🤖✨
We will use our M.P.U. 6050 to control a Graphic unit or say Model Paper Plane, which is commonly known as Teapot, with our M.P.U. 6050!
An easy and interesting project in which you use a MPU6050 (Accelerometer + Gyro) sensor module to control a simple 2-axis Servo Robotic Arm
Read data from an absolute orientation sensor without writing any code!
The tilt will be analyzed and shown as outputs on LEDs.
This project uses a 480x320 TFT display driven by a ST7796S controller, the touch screen is driven by a XPT2046 controller.
This is the smallest RC car with electronic stability control in the world - probably! And it's relatively easy to build.
A friendly introduction and simple tutorial about MPU-6050 (Accelerometer + Gyro) sensor module
In this project we will learn how to make a compass using the Arduino and the Accelerometer Gyroscope sensor MPU9250. Watch the Video!
Ever wanted to build your own Unity game, use an accelerometer for the controller or sprinkle a bit of AI in it? Well, here's how!
A Bongilcheon High School Makers club's team project.
This is the gyro sensor part of a Bongilcheon High School Makers club's team project.
Application notes for Pmod GYRO and Arduino Uno. In this app, 3 components (x, y, z) of the gyroscope are displayed in the serial monitor.
This Cubecon is for people who can't use a remote control. Cubecon can toggle TV power, adjust volume and change channels.
