Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Data’s Guide of “Development of a low-cost PV system using an improved INC algorithm and a PV panel Proteus model” research paper
Keep your machines oiled.
Make an Electricity Monitor for your home that utilises the cloud of the Arduino Yun, Temboo and Google Drive
Robots, wind energy providers and government tax agencies pay and work automatically, build on next gen. DLT = IOTA Tangle beyond blockchain
In this article, I explain how I integrated Dr. Wattson Board with Raspberry Pi and AWS IoT to create an Internet-connected energy monitor.
A simple protected power supply unit for Development Boards
The system will follow the light source and catch the energy with its solar panel.
let's build a circuit to repel the female mosquitoes making noise in your ears and saying "I will bite you soon".
Smart energy management systems are becoming widespread. Energy monitoring is easy with Raspberry Pi integrated to MiniIOEx.
Wind turbines operate in remote locations. So, let's find a way to monitor their health and visualise their digital twins in 3D.
SparkFun ESP8266 Thing Dev Boards help you reduce your utility bills by constant monitoring of the environment and feedback to save energy!
A simple and relatively inexpensive way to make an efficient DRSSTC (Dual Resonance Solid State) Tesla coil.
A basic project that describes the use and function of a capacitor in the electronic field.
Make a wind turbine at your home. This mini wind turbine is very easy to make and can be used as a charger.
Thermoelectric Generator built with Thermoelectric cooler (TEC). Using the Seebeck effect to generate enough energy to charge a phone!
This project will show you how to make your own solar cell.
Tesla Coil design made with only one Vacuum Tube and a few passive elements powered by MOT Transformer.
In this experiment I will describe you a way where the light from 10W Power LED diode is used for tarnsfering Audio signal wirelessly.
For driving Cockroft Walton Multiplier I use stable high voltage source which I made with minimal modification of the old PC power supply.
This project has been made by AndPM students & has proven to produce efficient electrical energy. Panels are kept perpendicular to the Sun.
🔰What is MOSFET Driver? A MOSFET driver is an electronic circuit or component that provides the necessary voltage, current...
This project describes how the AnalogPAK SLG47004 can be used as the core of a sine wave-based inverter.
