Print and assemble a snap-fit case for the Synaptics Coralboard SL, with two designs, interchangeable lids and optional 30 mm fan mounting.
Hide custom IoT sensors in plain sight. This rugged PETG-CF enclosure masquerades as a sleek, edge-lit solar LED fence light.
A US-based startup came to us with an idea that sounded like a joke at first: an alarm clock that only turns off when you sink a basketball.
In this article, I explain how I created a tabletop weather station with ePaper display, a Raspberry Pi, and an enclosure.
Orientation-aware 8x8 LED matrix clock
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
In this project I used a Particle Photon to control my garage door via an Android App.
Are you in or are you out?
The only enclosure for your Uno that can accommodate any shield stack height and can fit non-shield boards.
A sheet metal case for the UDOO module
You'll learn how to construct your own Arduino laboratory.
ESP32 GPS Tracking Device | Vehicle Tracking System | Enclosure design.
Minimalist, renewable internet radio.
STL files to print an enclosure consists of 2 parts. The top part holds the 1.8 " TFT Display and the bottom part holds the Photon.
Custom-built, compact RF reconnaissance unit with integrated dual SDR receivers, LNA, GPS & ESP32, offering wide RX range & TX on ISM bands.
How to use the ArduiBox ESP DIN rail enclosure kit to install your ESP32 or ESP8266 based project in a cabinet.
By following these steps, you can create professional-looking, durable housings
An enclosure for the Arduino Uno that not only allows you to see inside, but locks down wires coming out to keep them secure.
Build your own portable tabletop Word Clock with a 2.7 inch ePaper Display, Raspberry Pi and ProtoStax Enclosure
Testing out Raspberry Pi 4's temperature profile with and without fan(s) using ProtoStax for Raspberry Pi B+/Model 4B enclosure/case.
Bed occupancy detector for hospitals, nursing homes and home care patients. Can run for years on batteries.
Rasberry Pi Internet Radio in a small and elegant form
Use a 16x2 Character I2C LCD w/ your Raspberry Pi & ProtoStax Enclosure to display information like IP address, date/time & much more!
Raspberry pi Zero Hardware crypto wallet Enclosure design | DIY Project 2022
