A small box that monitors the brightness of street lights and transmits the brightness back to the cloud.
Maximize LTE projects with Fibocom OpenLinux and C++ Boost Libraries for efficient and reliable development of connected devices
Easily get your data to the cloud using the Blues Starter Kit for Cell + WiFi - Unboxing and first steps.
In this tutorial, we’ll connect a NORVI-GSM controller (ESP32 + Quectel EC25) to the ThingsBoard open-source IoT platform. The device will r
How to connect the Conexio Stratus device to the Golioth platform and perform over-the-air updates.
How to Use A9G Board to Subscribe to MQTT Topics and Receive Messages Using Ai-Thinker Serial Tool
Build your own home automation system using the Blues Notecard, Notehub, Node-RED, and Qubitro.
SOS device installed within the wheelchair to allow people with mobility impairments to call for help and send their location.
Point an AI agent at your IoT product data and derive real insights, using real data, through Notehub IQ from Blues.
Grove - Button is a momentary push button switch. This button outputs a HIGH signal when pressed, and LOW when released
This project was to setup a sensor suite attached to some "industrial" equipment, to monitor their status & simulate preventive maintenance
Reed switch is a magnetic type, if the switch enters a magnetic field, the contact feathers will closed, and it provides electrical signals.
Everybody loves beer, but few know of the silent danger of brewing and serving. Let's keep the brewmasters safe and the good times flowing!
This guide focuses on developing software with the IoTConnect C SDK.
Monitor the amount of sunlight received by outdoor plants and use red or blue light to supplement it when it is insufficient.
We have set up the bootloader and the App so that you can remotely update the firmware on the Arduino UNO-R4 Minima board from anywhere.
