Hardware and Software products

OpenSensors is a real-time data exchange building data infrastructure for the Internet of Things.

Give your vehicle a serious boost with the latest in rocket science. Just keep it away from Doctor Lizardo.

The PaPiRus HAT Case is designed specifically to fit the PaPiRus ePaper / eInk HAT module for the Raspberry Pi.

PaPiRus is an ePaper / eInk screen HAT module for the Raspberry Pi with screens ranging from 1.44″ to 2.7″ in size.

An 8-Channel power FET driver

The world's first open-source edge device w/ cellular/blockchain connectivity that collects physical world data in an end-to-end trusted way

The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs.

9 pin D-sub male interface for RS232

PHPoC Shield 2 is the next generation of PHPoC Shield. It is equipped with both wired and wireless LAN and support various expansion board

The PIC24FJ256GA7 Curiosity Development Board (Part Number: DM240016) is a low-cost platform with an integrated programmer and debugger a...

The Black HAT Hacker in bijou form. It's Pico HAT Hacker!

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7.Included in the pack is a USB Type-C cable for p...

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7 including Camera Module, 5 Inch display and all ...

Pi Cubes Communication Thermostat provides professional look solution for your room.

Pi Cubes DO4 Module is providing four digital relay outputs.

Pi Cubes UI4 Module is providing four universal inputs.

The PIR Shield Evaluation Board uses a mixed-signal CMOS device to create a functional passive infrared sensor evaluation board.

The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board.

The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board.

The Pmod CLP is a 16x2 character LCD module that uses a Samsung KS0066 LCD controller.

The Pmod DHB1 uses the Texas Instruments DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor.

The Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs.

The Pmod LS1 allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor.

The Pmod LVLSHFT is a digital logic level shifter.

The Pmod PS/2 is a module that allows users to interface PS/2 style mice or keyboards with their system.

The Pmod SWT provides users with four slides switches for up to 16 different binary logic inputs to for the attached system board.

The Pmod TC1 is a cold-junction thermocouple-to-digital converter module designed for a classic K-Type thermocouple wire.

The Pmod TMP2 is an ambient temperature sensor powered by the Analog Devices ADT7420.

A single Arduino compatible pozyx tag. Localization is not possible without the anchors.

Programmable-Air is a hardware toolkit that allows you to inflate and deflate objects.

This Jumbo-sized project box is perfect for storing and transporting a multitude of objects.

Plug this "HAT" onto a Raspberry Pi 3 to instantly turn it into a full featured patient monitor with ECG and Pulse oximetry measurement capa

The M5Stack PROTO Module is a flexible blank circle with 30 pins which could connect with all series of M5Stack Core

ProtoPi T allows you to play around with GPIO pins on the Raspberry Pi 3 or 2, all 40 them !

PSoC 3 with 8051 CPU and lots of programmable analog and digital blocks

An easy-to-use and inexpensive development platform enabling you to create unique designs with the industry’s smallest ARM® Cortex-M0 device

The world's first Dual-Shield development board with the largest PSoC 4 device

Laboratory grade probe for measuring temperature.

Allows the Pulse Train Hat to be used stand alone.

Quickly add Grove modules to your PYNQ projects with a choice of a Grove Shield or a Grove Adapter.

Quickly add Grove modules to your PYNQ projects with a choice of a Grove Shield or a Grove Adapter.

The RAK7258 Micro Gateway is a full 8-channel LoRa Gateway with built-in Ethernet connectivity for a straightforward setup.

RAK833 Industrial Grade Mini PCIe LoRa Gateway Concentrator Module, SX1301 & FT2232H Chip, 433/470/868/915MHz, support SPI & USB

The Raspberry Pi 3 Model B is the 3rd generation Raspberry Pi with a 64-bit 1.2GHz quad-core processor, 1GB of RAM, WiFi, and Bluetooth 4.1.

Here comes the 4th generation Raspberry Pi model B of popular Raspberry Pi family!

Replicape is a high end 3D-printer electronics package in the form of a Cape that can be placed on a BeagleBone Black.

Seeed’s ReSpeaker 4-Mics Linear Array Kit is an extension board, aka HAT designed for Raspberry Pi.

ReSpeaker is an open modular voice interface to hack things around you.

Microcontrollers with integrated wireless capability

A small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module.

This board will allow you to hook your Arduino up to any screen with a standard RCA Jack!

The RobotGeek Voltage Divider is a simple effective way to turn a variable resistor, such as an FSR into a tunable 0-5v analog signal.

Experiment with open hardware and agriculture, or at least save your plants while away from home!

Spartan XC7S6 and RPi Pico 2040

Seeed XIAO BLE nRF52840 Sense is a tiny Bluetooth LE development board designed for IoT and AI applications. It features an onboard antenna,

SIMCom LTE Cat-1 Module + GNSS

The world’s lowest power 15-DOF wireless sensor module

Meet the kit that will take your home to the 21st century. It can turn any object into an internet-connected device. Automate your curtains

Connect the Teensy 3.1 to compatible large RGB LED matrix display panels, to play GIFs and patterns.