Hardware and Software products

Microcontroller:ATmega2560 Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V Digital I/O Pins:54 (of w...

Stream data from your devices and applications to beautiful visualizations in your web browser.

It's compatible with Leaf Maple. But It's a mini version. It only need 9$. And It supports Arduino IDE. It's cool to program it with Arduino

The Myo armband lets you wirelessly control technology with gestures and motion.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface

The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.

PHPoC WiFi Shield 2 is the next generation of PHPoC WiFi Shield. It is equipped with wireless LAN and support various expansion board

Program robots, create games and animations, make interactive IoT projects, and do loads of other amazing stuff!

Pixhawk series autopilot hardware

The Pmod HB3 is a 2A H-Bridge module.

P9038 and P9025AC Wireless Power Reference Kits IDT introduces a turnkey 5 W, Qi-compliant wireless power transmitter and receiver solution

Your favorite board, now with WiFi+Bluetooth and Grove connectors!

20 GPIOs, 2.4GHz WiFi, BLE 5.0, 8MB PSRAM, 16MB FLASH, esp32-s3 dual-core, battery charge supported

Moisture and temperature of soil are two main concerns in agricultural area.

Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.

A PLAY:1, PLAY:3, or PLAY:5 speaker compatible with the Sonos API and IFTTT Channel.

This simple board breaks out a micro-B USB connector’s VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popula...

The SparkFun Qwiic Micro OLED Breakout is a Qwiic-enabled version of our popular Micro OLED display! The small monochrome, blue-on-black ...

The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI a...

Imagine an Arduino with LoRaWAN connectivity. We decided to use one of the most popular microcontrollers and make it LoRaWAN ready.

Silicon Labs’ Thunderboard™ Sense 2 is an ultimate multi-sensor, multiprotocol cloud inspiration kit

Ultra96 Accessory provides access to both Xilinx JTAG and Terminal UART

GROVE Cable is a data line for communication between M5Stack products.

H08R70 is an infrared (IR) time-of-flight (ToF) ranging sensor module based on ST VL53L1 sensor and STM32G0 MCU

An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones)!

This is lightweight, small size, high efficiency, low consumption and low noise water pump

The 4D Arduino Adaptor Shield (4Display-AdaptorShield) is a simple Arduino Shield designed to provide a convenient interface to attach 4D Sy

Changes gender for any 6-pin female header, female to male.

This is a 7 HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it.

Out-of-the-box ready motor control development kit based on the AMD Kria™ K24 SOM

Unlock the power of the Internet of Things by prototyping, building and hosting IoT applications with AT&T Flow Designer.

Easily create an embedded device that securely connects to AWS IoT with this pre-configured development board.

An industrial microcontroller in the Arduino form factor. Libraries for Arduino IDE available.

Calliope mini is a small educational development board made for primary school and up. This is the pre-production run version.

The Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA.

Creator Ci20 is a high performance, fully featured development board for Linux and Android.

Turn your Samsung smartphone into a portable next-generation virtual reality system.

gen4 Interface Board (Included in gen4 HMI module)

Grove – Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthful gases

Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume over 85 dB and is integrated with Grove interface.

Particle Interface 1 channel 10 amp relay controller with 7 additional GPIOs.

This is a 7 inch screen that is directly compatible with LattePanda.

Light up the dark with custom patterns using the Crazyflie 2.0 LED-ring expansion deck

The industry-leading BLE test app for iOS. Used by over a half million people, LightBlue Explorer lets you scan, connect to and browse an...

A simple, very bright, 250mcd, white LED LilyPad. Light up the night!

Includes integrated pass transistor, integrated current sensing, and reverse discharge protection.

The myDigital accessory board for the NI myDAQ & NI myRIO is designed to provide students a cost-effective, portable, and engaging platform.

NEMA 23's are power houses when it comes to larger machines that need the extra torque.

The Pmod OLED is 128x32 pixel monochrome organic LED (OLED) panel powered by the Solomon Systech SSD1306.

The Pmod SD provides a full sized SD card slot that can be accessed through SPI.

The Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, integrated into a keyboard. By incorporating the board into a ...

Ready lets anyone create powerful hardware and software projects without using any code... its also the easiest wat to program your Arduino

This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino.

Infineon’s first Arduino compatible 60GHz radar sensor for makers, developers and prototyping

The Servo Module can control up to 16 hobbyist/RC servos. The standard PWM output is compatible with servos and motor controllers of all ...

Solo, the world's first Smart Drone, is the ultimate tool for aerial video and photo. It's open source and hackable, too.

The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer ...

SensorTile development kit.

The 3.6's sibling, less beefy (and a bit more affordable) – but still a powerhouse for music and USB controller applications.

The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That’s right, now you can s...