Hardware and Software products

Measure the main environmental parameters with a single shield

Easily add Relays to your MKR Board.

Yún Shield 101 is a powerful IoT shield that allows you to remotely upload sketches to your Arduino board.

TailBat is an external battery accessory designed for M5ATOM.

The series uses the latest Core Independent Peripherals with low power features.

First BI Service with Pay-per-Session Pricing and ML Insights for everyone.

Instantly expose your device to the internet with a real SSL cert and a reverse proxy service.

DRV8711 BoosterPack

Breakout for LinkIt Smart 7688 is a Grove port integrated expansion board for LinkItTM Smart 7688 development board.

The Raspberry Pi 3-based revision of the original Compute Module

The Coral Dev Board Micro is a microcontroller board with a dual-core MCU, Coral Edge TPU, camera, and microphone.

The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 APSoC.

This motor control shield is one of the first high current motor control boards being compatible to Arduino Uno formfactor boards

The development board based on the mid-tier Qualcomm® Snapdragon™ 410E processor

Erle-Brain 2 is a Linux-based artificial brain for making robots and drones with ROS support and based on the Raspberry Pi 2.

Everything you need pre-installed on the device - just plug in via USB and start writing JavaScript code immediately!

The IoT kit gets you started with amazing hands-on experience projects in the field of Internet of Things (IoT).

6-pin angled headers for Pmod and breadboard connectivity.

When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be used on all kinds of 3.3V/5V main controllers.

Gateblu allows you to connect smart devices, motors, servos, sensors, and additional protocols to Meshblu and Octoblu!

Connect your Tessel anywhere with GPRS/prepaid unlocked SIM card support! Texting and phone calls supported. Ships with one U.FL antenna.

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system.

An analog output pH monitoring meter kit.

This weight sensor kit is equipped with all the accessories needed to build the scale which reduces the difficulty of structure construction

It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope.

The Grove - 16-Channel PWM Driver is based on NXP PCA9685, which is a 16-Channel, 12-bit I2C PWM driver.

More cost-effective monochrome backlight derivative for you, i.e.,

The Grove Base Hat for Raspberry Pi provide Digital/Analog/I2C/PWM/UART port to meet all your needs.

The All-in-one Kit is powered by one Arduino UNO compatible Board (ATmega320p based Seeeduino Lotus) together with 10 Grove Arduino sensors

The Grove - CO2 Sensor module is infrared CO2 sensor high sensitivity and high resolution.

Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of loc

The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers.

The Grove - Variable Color LED is an RGB LED that can be controlled by both digital and PWM signal, there are three changable resistors on b

The H-Bridge Kit 2GO is a ready to use evaluation kit.

A high-resolution 8", IPS, 1024x768 display with HDMI driver board and keypad - perfect for building into projects like arcade cabinets!

A standardized software and hardware infrastructure to create modular robot hardware.

Husarion cloud allows you to control, program and share robots.

The EVAL SHNBV01 is a sensor board with Infineon's DPS310 barometric pressure sensor and Bluetooth 4.0

Intel® NUC kit features a customizable board and chassis that are ready to accept a wide variety of memory, storage, and operating systems.

A multi-user version of the notebook designed for companies, classrooms and research labs

RosBot Baseboard is based on Arduino UNO and has 2 dual on-board H-bridge motor drivers.

1 meter long digitally programmable RGBW LED Strip with 144 LEDs.

LidarBot is a four-wheeled car based on indoor navigation.The car body is loaded with lidar, four Mecanum wheels, control-wheel bottom board

The best-in-class IoT platform that is the most powerful and with lowest cost. No wonder it is part of most commercial Wi-Fi IoT products!

High-Sensitivity Optical Sensor for Smoke Detection Applications

The MAXREFDES117# development platform is a tiny, low-power board ideal for medical and wearable applications.

BLANK

3-Axis, 12-bit/8-bit Digital Accelerometer

T00R10 is a triangle mounting hole module that supports M2 and M2.5 screw sizes

IR Sensor -12c connect - ambient temperature - Noncontact Temperature Sensing -Case Temperature - Gas Concentration - Flame Detection

NuGet with nanoFramework Base Class Library.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface

Low Voltage Relay Output

O Watch Sensor kit provides add-on sensor board to add compass, temperature, humidity and pressure function.

It is a wired LAN programmable board embedded with a PHPoC interpreter. It supports various interfaces to connect with sensors.

Providing the most simple and effective way to connect your embedded application to the Google Cloud IoT Core.

Designed for Raspberry Pi 2B/3/B +, featuring TI's higher-end DAC chip (PCM5122)

The Pmod GYRO is a 3-axis gyroscope powered by the STMicroelectronics L3G4200D.

The Pmod KYPD is a 16-button keypad arranged in a hexidecimal format (0-F).