Hardware and Software products

MinnowBoard MAX is a compact, affordable, and powerful development board for both professionals and makers.

RELAY click can control various devices with up to 5A, 250V AC/30V DC loads.

IOT2020 enables students to gain hands-on experiences at the beginning of their studies as well as afterwards in challenging projects.

The WTV020SD is a small, simple IC for embedding audio-playback into your next project. These devices are commonly used in children’s toy...

The nRF24L01 module is the latest in RF modules from SparkFun. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the nRF...

ADVANCED WEATHER SENSOR

Tessel 2 is a development platform you can embed in a product. Build fast with Node.js/io.js, then optimize the hardware and build thousands

H03R00 is a compact DC-DC buck power supply with a 3.3V/1A DC output and 5-40V DC input

The low-power Microchip 8-bit AVR RISC-based microcontroller featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM...

balenaFin is a Raspberry Pi Compute Module carrier that runs software that the Raspberry Pi does, but hardened for deployment in the field.

The BLE Module allows your tesselation to work as a Bluetooth LE master or slave device. It is compatible with iOS 5+, Android 4.3+ and s...

ULN2003A BoosterPack

A translucent silicon rubber button pad with 16 buttons. Add RGB LEDs and go to town!

This technique has enabled them to avoid detection from predators.

Graphical design tool for configuring GreenPAK mixed-signal ICs and building custom analog and digital circuits.

The one and only tablet from Apple.

Mobicle is the User Interface you have been looking for to interact with all of your Particle modules(Photon, Electron, Core, etc).

A watch with an always-on B&W E-Paper display, up to 7 day battery life, water resistant up to 50 Meters, and works with Android and iOS.

The Pi RTC is based on the clock chip DS1307, it can provide a real-time clock(RTC) for raspberry pi via the I2C interface.

20 GPIOs, 2.4GHz WiFi, BLE 5.0, 8MB PSRAM, 16MB FLASH, esp32-s3 dual-core, battery charge supported

Control locks, lights, electronics, and everyday things around you—from anywhere, with your smartphone with IFTTT.

This tiny breakout board features the ADMP401 MEMS microphone

High-performance MCUs with Arm® Cortex®-M7 core

WaveForms is the newest release of our powerful multi-instrument software application.

Add the sense of sight to Tessel! Supports 640x480, 320x240, and 160x120 Still image camera.

SimpleLink™ Bluetooth Smart®/Multi-Standard SensorTag

Wi-Fi Core (ESP8266/ESP-12F)

The DFRobot 360 degree rotary encoder module is based and designed on the EC11 rotary encoder button.

An interactive way to play games and control smart home routines through your compatible Echo device.

High quality board 100% functional compatible with official Arduino IDE

An OLED (organic light-emitting diode) has many advantages over traditional LCD displays, including a faster response speed.

It features the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity.

Build a complete, wireless sensing application with the Helium Starter Kit.

Just what you need!

A USB A to micro B USB cable for all your programming needs!

OLED DISPLAY

A powerful 64-bit expandable single board computer – starting at just $15.

The RobotGeek Sensor Shield will fit on any Standard Arduino board*, and break out the digital and analog pins into 3-pin Connectors.

The Teensy USB Development Board is a complete USB-based microcontoller development system featuring a 32 bit ARM processor.

Build cross-platform mobile apps for iOS, Android and UWP.

A touchless sensor capable of detecting simple gestures. Sensitive up to about 10" (~25cm), using XYZ Interactive's GestureSense technology.

This 5VDC 4000mA switching power supply comes with US and EU plug adapters, and is recommended for use with FPGAs and microcontrollers.

Actions on Google lets you build apps for the Google Assistant. Your apps can help you engage users through Google Home, eligible Android ph

The Arduino Mini is a very small microcontroller board.

MKR WAN 1300, a powerful board with functionality of a Zero plus LoRa connectivity.

Designed for short range BT interactions and power savvy projects.

BeagleBone Black, but with WiFi, instead of Ethernet.

M5Core GRAY is a development kit based on ESP32 chip composed of a gray M5Core and a Bottom Base board.

Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume over 85 dB and is integrated with Grove interface.

Based on LoRa™ spread spectrum modulation , Low Power with Long Range 433MHz Module WT-900M

NCIR is a unit can measure body temperature or be applicated for movement detection which integrates MLX90614

Omega2 is a tiny, easy to use, and affordable computer module which runs Linux and has integrated Wifi.

A watch with an always-on color E-Paper display, up to 7 day battery life, durable glass lens, and thin, curved ergonomic design.

PHPoC WiFi shield is equipped with wireless LAN functions. Compatible with Arduino Uno or Mega. Supports a wide range of API.

The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a wide range of Total Volatile Organic Compounds

This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board friendly 0.1...

This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to pins...

Your Software Stack for the Internet of Things

Save data from your MKR board

The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for developers.