Onesignal Library with Micropython || ESP8266 and ESP32

I learned python a few years back, I just couldn’t find anything to do with it. Funny right? There are a lot of things you can do with python, but I am especially particular about python in hardware and I do not have a raspberry pi computer laying around (their prices have been increasing lately). Then I found out about micropython, which allows me to write python code for low-memory devices such as Espressif ESP8266 and ESP32 (they are my favourite boards, leave your favourite board in the comment section so I can check them out). Then boom! my micropython journey started, after some months of polishing my python skills, I decided to put it to the test by building a library for Onesignal services, which I use a lot. A noob as I am, I desperately searched for a OneSignal library for the Arduino framework but couldn’t find one, so I had to learn to make requests with Arduino, which gave me a lot of experience in making requests, python is relatively easy to write so I decided to create the library for micropython as a way to give back to the embedded community. I plan on writing one for Arduino in nearest future.

Installing the library

I plan on making it possible to install via upip later on, but for now, you can just download it from my GitHub repo. The library also runs on the regular big python.

Adding the OneSignal Library to the file system

I am using Thonny ide, so I will be explaining using Thonny.

Open the onesignal.py file in Thonny, go to file and click “save as”

Then click on "micropython device" and type in the name of the library as “Onesignal.py” and click save.

Sending push notifications

Firstly we have to import the Notifier object from the library

`from Onesignal import Notifier`

Then create an object with the class

notifier= Notifier("APP ID","API KEY","en")

OneSignal has a thing called segments, which allows you to group your subscribers into various categories; thereby allowing you to send notifications to a certain group of people.

To send a “hello” message to all your subscribers, the code will look like this.

notifier.notify_segment("Subscribed Users","hello") # send to a particular segment

To read more on Onesignal segments click here.

Let's assume you build a facial recognition device for your home which notifies everyone in your family when there is someone at the door, but you want only you to get notified when your girlfriend is at the door, this can be done using OneSignal “player ids”.

OneSignal attributes to each of your subscribers a specific “player id”, which is unique to each subscriber and can be used to send notifications to a specific subscriber.

notifier.notify_user("your player id", "hi Pius, Jessica is at the door")# send to a specific user

Sending text messages

Before sending text messages, you will have to create a Onesignal text message app, I would not be going over that in this article but here is a [link](https://documentation.onesignal.com/docs/sms-quickstart) on how to set this up.

After you have created your app, you will need to find your app ID and API key, you can find this in your messaging app by clicking on settings and then keys & IDs

Sending atext message

First, we need to import the SMS_Messenger class from the library

from Onesignal import  SMS_Messenger

Create an object of the class, with your App ID, API key, Twilio phone number, senders name and language.

messenger =SMS_Messenger (
"Zbe1d80b-1234-5678-91f2-f27cc107e112",
"ABCDEFGHIJKLMNOpqrstuvwxyzbjtenarsjcdutavdkats",
["Twilio phone number"],
"sender's name",
"en"
)

To send a text message, use the following line of code

messenger.send_text("Hello",["recipient phone number"]) # make sure phone number is added to your onesignal subscribers

Sending mails

First, we import the mailer class

from Onesignal import  Mailer

Create an object of class Mailer, with your App ID, API key and language

mailer=Mailer(
"Zbe1d80b-1234-5678-91f2-f27cc107e112",
"ABCDEFGHIJKLMNOpqrstuvwxyzbjtenarsjcdutavdkats",
"en")

Create variables to hold the subject and body of your mail

subject= "cat facts"
body= """<html>
<head>Welcome to Cat Facts</head>
<body>
<h1>Welcome to Cat Facts<h1>
<h4>Learn more about everyone's favorite furry companions!</h4>
<hr/>
<p>Hi Nick,</p>
<p>Thanks for subscribing to Cat Facts! We can't wait to surprise you with funny details about your favorite animal.</p>
<h5>Today's Cat Fact (March 27)</h5>
<p>In tigers and tabbies, the middle of the tongue is covered in backward-pointing spines, used for breaking off and gripping meat.</p>
<a href='https://catfac.ts/welcome'>Show me more Cat Facts</a>
<hr/><p><small>(c) 2018 Cat Facts, inc</small></p><p><small><a href='[unsubscribe_url]'>Unsubscribe</a></small></p></body>
</html>"""

Then we send an email using the “send” function in the Mailer class

To send an email using player id, use this line of code

mailer.send_mail(body,subject,"6392d41a-b776-4c7b-as20-cd58t32y3a96")

To send an email to a subscriber via their email address this line of code

mailer.send_mail(body,subject,emails=["janedoe@gmail.com"])

Thank you for reading my article. If you are interested in the Arduino version of the Onesignal library follow me so you can get notified when I post it. I also recommend you create issues and pull requests on the GitHub low-memory if you find anything in the code that can be improved. Thanks again.