Natalie I ClouseCaleb HubbellSamir Shah
Published © GPL3+

Wireless Environmental Sensor

Our project is to design and build a wireless sensor array for a pig farm in Thailand.

AdvancedWork in progressOver 1 day1,710
Wireless Environmental Sensor

Things used in this project

Hardware components

Raspberry Pi 3 Model B
Raspberry Pi 3 Model B
×1
8gb SD card
×2
ProtoPi-T v2 GPIO Breakout for Raspberry Pi 3 / 2
ProtoCentral Electronics ProtoPi-T v2 GPIO Breakout for Raspberry Pi 3 / 2
×2
SparkFun Atmospheric Sensor Breakout - BME280
SparkFun Atmospheric Sensor Breakout - BME280
×1
NO2 gas sensor
×1
MTDOT-923-AS1-X1-UFL-50
×2
Teensy 3.5
Teensy 3.5
×1
Light sensor
×1
CH4 sensor
×1
Switching Voltage regulator
×3
240V AC PWR in
×1
12V DC PWR in
×1
Antenna connector
×2
US plug
×1
Thailand plug
×1
PulseLarsen Antennas SPDA24918
×2
Raspberry Pi 3 B+ Case
×1
USB adaptor
×1
USB cord
×1
Voltage monitor
×1
xbee headers
×4
1-Channel Signal Relay 1A SPDT I²C Mini Module
ControlEverything.com 1-Channel Signal Relay 1A SPDT I²C Mini Module
×1
Luxometer
×1
Headers
×10
2032 battery holder
×1
Misc. Hardware
×1

Software apps and online services

Raspbian
Raspberry Pi Raspbian
Arduino IDE
Arduino IDE
Google Sheets
Google Sheets
SolidWorks

Hand tools and fabrication machines

Drill
3D Printer (generic)
3D Printer (generic)
Screw driver set
File

Story

Read more

Custom parts and enclosures

Sensor Housing

Here is a front open view of the enclosure that will be mounted in the piggery and will house the sensors.
revised 5/16/19 to reflect the current state of the project.

Schematics

Project Timeline

This is the Timeline for our project.
revised 5/15/19 to reflect the current state of the project.

Engineering Requirements

These are the requirements of this project as established by our sponsor.
revised 5/16/19 to reflect the current state of the project.

Block Diagram

This is a top level block diagram of our system.

Interface Definitions

Defines the interfaces portrayed in the block diagram.
revised 5/16/19 to reflect the current state of the project.

PCB schematic

This is the schematic of what will be on the PCB.
revised on 5/15/19 to include pinout wiring.

Project Poster

Bill of material

These are the components that we bought for our project

Estimated power budget

This is the power budget for our project that is subject to change as we test components and make decisions.

Code

Github

This holds all existing code created for the project

Credits

Natalie I Clouse

Natalie I Clouse

1 project • 0 followers
Caleb Hubbell

Caleb Hubbell

1 project • 1 follower
Please see my LinkedIn: https://www.linkedin.com/in/calebhubbell/
Samir Shah

Samir Shah

0 projects • 0 followers

Comments