Naresh krish
Published

Getting Started with the RAK831 LoRa Gateway and RPi3

This project takes you through all the steps required to get your RAK831 LoRa Gateway module up and running with WiFi as the backhaul.

IntermediateFull instructions provided3 hours48,330
Getting Started with the RAK831 LoRa Gateway and RPi3

Things used in this project

Hardware components

RAKwireless RAK 831 Lora Module
×1
Raspberry Pi 3 Model B
Raspberry Pi 3 Model B
×1
Jumper wires (generic)
Jumper wires (generic)
×1
RAKwireless RAK 811 Lora Node
×1
ft2232H usb to SPI module
×1
Breadboard (generic)
Breadboard (generic)
×1

Software apps and online services

The Things Stack
The Things Industries The Things Stack

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

RAK 831 to Raspberry Pi pin connection

Code

LoraNet gateway

Setting up a sx1301 gateway wiki

Credits

Naresh krish

Naresh krish

22 projects • 119 followers
Maker, Hacker, Guitarist, Full time Android and iOS Dev.
Thanks to LoraNet team and TTN-ZH.

Comments