How to Install Linksys Re3000w in 7 Simple Steps

How to Install Linksys Re3000w in 7 Simple Steps

When we unexpectedly enter a Wi-Fi dead zone and all these things simply vanish in a flash, we have all been through the times when we are watching our favorite movie or playing our beloved online game. In addition, with the exception of that room, almost every room has a high network speed.

The sole explanation for this is the Wi-Fi signal's inability to enter that particular region. But wait, with the aid of a Linksys Wi-Fi extender, this issue can be solved with ease and is a cakewalk to fix. This will allow you to increase the network to reach all corners of the house and even further.

Signs that you need a Wi-Fi extender from Linksys

In some corners of the home, you may face dead spots, but it may not be the fault of the Wi-Fi extender. You may have put the extender at a position where, because of something, it may not get a proper link and the network may fluctuate or get blocked.

Therefore, before you buy an extender, make sure you try to place it in another location and select a centralized location for your building. Make sure that the Linksys Re3000w extender is correctly situated in the center of the house and that all areas are as close to the router as possible.

Even if you still experience connection issues after doing that, then you certainly need a Linksys extender reset. In addition, just buying it won't help and you need to configure Linksys RE3000W Setup to prepare it for improving your Wi-Fi signal. Let us take a look at the steps needed to do it.

Step-by-Step Procedure For Linksys RE3000W Setup

You need to know some things about your wireless router or connection until starting up with the Linksys RE3000W Setup:

The name of the wireless network that is also referred to as SSID

• The name of the wireless network that is also referred to as SSID
  

The wireless network password (default if you haven't set it up)

• The wireless network password (default if you haven't set it up)
  

Therefore, you can continue with the steps listed below when you're finished with obtaining this information.

Step one: First of all, you need to set up/place the extender at a position where it is in your Wi-Fi router's range so that the router can pick up the network link. Also, ensure that the extender is connected to a secure power source, such as a switch or UPS, and then ensure that on the top of the extender there is a light blinking.

Note that for the first time, you will need to set the extender closer to the router when you begin setting it up. For example, when you want to set it up, you can position both the router and the extender in the same room for the first time and then you can transfer it anywhere in the house you want after the Linksys RE3000w setup is complete.

Step two: Using an internet-accessible system such as a computer or smartphone, the next step is to connect to the network. With the name of Linksys Extender Setup, you can see a network open. Make sure you have at least a 50 percent Wi-Fi signal on the computer you are using to set up the extender.

If you do not see the name of the Wi-Fi Extender network, which is the SSID of the network, you may need to follow some troubleshooting steps.

Step Three: The next step is to open a web browser of your choosing on the computer that you have chosen to connect to the SSID network extension network and then visit the Linksys re3000w setup website that is extender.linksys.com by manually typing it or copying-pasting it in your browser's URL bar.

Step four: When you visit the above-mentioned website, you will be greeted with an extender setup landing page that allows you to proceed with the extender setup process. Clicking on the start button that appears on the screen is all you need to do.

Step five: The setup will launch once you click on the start button, and you will be provided with a licensing agreement before continuing with anything else. So make sure you thoroughly read it and click on the button that says "I agree" if you think it right.

Step six: Now, from here, the key setup starts. The online setup wizard will start searching for all available wireless networks, and by clicking on your network's SSID from the list of available networks, you need to pick the wireless network that is available at your home.

Note that if you receive a message saying that you have put the extender very close to the router, simply ignore it and click on the "connect anyway" button so that you can proceed with the setup process otherwise you can feel free to interrupt the process and find a better position and then continue with the extender setup to expand the network range.

Step seven: To broaden the selection, the next step is to enter the wireless network password you are trying to connect to. After entering the password in the appropriate area, click the next button to continue with the configuration steps below.

Your screen will show you a message notifying you that your Linksys re3000w setup is complete after you have successfully connected to the network, and you can now enjoy the expanded network in rooms where a network was not previously usable. By visiting the area with a computer, you can easily check it and check whether you are now having a proper connection or not. To ensure proper connectivity, you can check the speed of the Internet as well. For now, that's all we have.