Published May 11, 2020

Arduino Bluetooth Android

Android app to control Arduino inputs outputs via Bluetooth.

IntermediateFull instructions provided3,586

Things used in this project

Hardware components

Arduino Nano R3

Resistor 1k ohm

HC-05 Bluetooth Module

Resistor 4.75k ohm

Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer

Story

Switch 4 Arduino outputs by the toggle switches, read 4 inputs by the 4 lights, read voltage of 2 analogue inputs, read temperature from DS18B20 sensor and adjust analogue Arduino output. Inputs not used can be connected to GRD. The Arduino update data every second. Android app can be downloaded from GitHub. Software includes code, app and Arduino sketch. The code includes detailed explanation. When downloading sketch to Arduino HC-05 has to be disconnected.

App is in Basic for Android (B4A) a free program https://www.b4x.com/Transfer app, APK file to Android device and install it. Connect Arduino via OTG cable.

HC-05 has to be set to baud rate of 9600, alternatively change the baud rate in the Arduino sketch to the rate of the HC-05. The app pairs Android with the HC-05.