Seamlessly connect your serial devices to the network with Modbus support.
Integrating legacy serial devices into modern Ethernet networks can be a challenge, especially when space is limited. The PP-ETS-NR by PLATYPUS is a high-performance, ultra-compact Serial-to-Ethernet module designed for industrial automation and IoT applications. Whether you're working with Modbus sensors or remote monitoring systems, this module provides a reliable 10/100Mbps bridge in a tiny form factor.
Key Features- Compact Design: Ideal for space-constrained embedded systems.
- Supports 10/100Mbps Ethernet and serial speeds up to 921kbps(It is possible to support up to 4M through a maximum firmware update.)
- Industrial Reliability: Supports a wide operating temperature range (-40°C to 85°C).
- Protocol Support: Built-in support for Modbus TCP and Modbus RTU conversion.
- High Speed: Dual-stack IPv4/IPv6 with 10/100Mbps Ethernet interface.
- Easy Config: Simple AT commands or web-based configuration for quick setup.
PoE can be connected depending on the application; please refer to the manufacturer's datasheet for a detailed connection guide.
Since there are no components mounted on the bottom side, you can proceed with SMT for the module as is.
- Smart Factory: Connecting RS232/485 PLCs to a central management server.
- Energy Management: Monitoring power meters via Ethernet.
- Remote Console: Accessing headless DIY projects over the network.
The PP-ETS-NR is a game-changer for engineers who need a "drop-in" networking solution without the bulk of traditional converters. Its robust design ensures it stays connected even in harsh industrial environments.
NoticeVersions with headers and versions without headers are being sold separately. You should be careful to distinguish between them when making a purchase. Also, please note that the header is configured at 2.00mm instead of 2.54mm. I have confirmed that it works very well, and the best part was the quick response. I am leaving the link below.
Comments