Published November 13, 2022

Leds

This Leds Is Making A Smart Led

BeginnerFull instructions provided186

Things used in this project

5 mm LED: Red

This Is The Leds That While Open

Resistor 1k ohm

This Is The Resistor That Make The Power Of The Arduino Going To The Led Be From 4-1 Volts

Solderless Breadboard Half Size

The Main Board

Breadboard, 170 Pin

The Main Board

Frist, You Will Get Many Leds. Second, You Will Put Every Cathode In Positve Then You Will Get 10V And 9C Power Supply And Open Them

1 project • 0 followers