RF Based DC Motor Direction Controller project provides an easy way to control the direction of your DC Motor connected to the receiver. This project has been design around HT12E and HT12D encoder / decoder chips from Holtek. With jumper selectable address on the receiver and transmitter we can control multiple motors in one area without interference with one remote.
ApplicationRemote Motorized Volume ControlRemote Toy or Robot ControllerRemote Controlled CurtainsFeaturesSupply input, Transmitter : 3 ~ 5 VDC, 5 V @ 20 mA & Receiver : 5 V @ 31 mA without MotorMotor current and supply: 5 ~ 6 VDC @ 500 mARange up to 30Mtrs, open area it can be moreJumper connector selectable 8 bit address codeValid Transmission LEDOn Board On/OFF Slide Switch for TransmitterPower-On LED indicator in the receiver/transmitterHigh noise immunityScrew terminal connector and terminal pins for easy input/output connectionFour mounting holes of 3.2 mm eachPCB dimensions, Transmitter : 60 mm x 37 mm & Receiver : 60 mm x 58 mm
From:http://www.electronics-lab.com/project/rf-remote-dc-motor-direction-controller/
Parts List
RF Remote DC Motor Direction Controller-Transmitterhttps://easyeda.com/GerryChen/RF_Remote_DC_Motor_Direction_ControllerTransceiver-a2WQ8pHZT
Comments