The Story of that project is simple and applicable. Most of the industries work on machines are required to be done in a particular Time Frame. So one should not to worry about that f he has BOLT iot module. In this user simply set the time and after that BOLT iot module invoke the Buzzer making sure the user to end that machine operation.
Basics Of That Model :Step1:Collectthecomponents
- Register your Bolt device to the Bolt cloud.
- Create a free account on Integromat.
Step 2 : Connections :
- Connect the longer end of the Buzzer to pin 1 of the Bolt.
- Connect the shorter end of the Buzzer to the GND pin of the Bolt.
- Power on the Bolt device using a micro-USB cable.
Step 3 : CreatingAccount in Integromat
- Log in to your Integromat account.
- Click on Create a new account.
- Search and select "bolt iot".
- Enter your API key by clicking on the Add button as shown below. You can find your API key on your Bolt Cloud dashboard.
After This :
- Enter the Device ID and select pin 1 as the Buzzer will be connected to this pin.
- Choose the state as HIGH so as to make the Buzzer to turn on.
- For buzzer to ring for a few seconds..we need to add a delay before switching off the Buzzer again.
- Click on the tools option and select sleep.
- Enter the number of seconds the to make the buzzer ring For Ex- 10 sec (duration of the Buzzer in which it ring ).
- Now, Click on adding a new module and choose Bolt IoT again. we also have to switch off the Buzzer by sending a LOW to the Buzzer.
- We have toEnter the same Bolt ID and Pin, and then select state as LOW.
- For adding the time we have tclock icon on the initial Bolt module. Choose the time that you want the alarm to ring and click on OK.
Comments