Hardware components | ||||||
 |
| × | 1 | |||
Software apps and online services | ||||||
| ||||||
1. Set up the connections as required using the Bolt WiFi module, a temperature sensor and a set of male to female connecting wires as shown below.
2. Connect this module to the system and set it up in the Bolt website.
3. Configure the device and set up hardware settings.
4. Type the program required to run the polynomial regression algorithm on the data sent by the Bolt.
5. Save the code and ensure that the connected device is online
6. Place the system inside the fridge and close the door but ensure the connection continues.
7. Open VMware Workstation 12 Player
8. Login and type the code for the credentials for sms details as well as email details
9. Type the code for the program as follows
10. Implement the code to obtain output
11. Check the obtained graph in the Bolt website
12. Select the predict option to obtain the estimated value
13. From the program, it was coded to send message and email when an anamoly is detected.
Thank you
Comments