Texas LaunchPad CC3200 - Accelerometer/Temp + Taurus IOT

/*

Taurus IOT Plataform with CC3200 LaunchPad

 By: Leonardo Gonçalves - Inatel - Brazil

 */

#ifndef __CC3200R1M1RGC__

// Do not include SPI for CC3200 LaunchPad

#include <SPI.h>

#endif

#include <WiFi.h>

#include <Wire.h>

#include <BMA222.h>

BMA222 mySensor;

#include <Wire.h>

#include "Adafruit_TMP006.h"

Adafruit_TMP006 tmp006(0x41);

// SSID da sua rede

char ssid[] = "SSID";

// Senha

char password[] = "PASSWORD";

int objt;

int diet;

int8_t x;

int8_t y;

int8_t z;

char server[] = "104.131.189.228";    // Taurus address 

String GETtoTaurus;

WiFiClient client;

void setup() {

  //Initialize serial and wait for port to open:

  Serial.begin(115200);

  mySensor.begin();

  uint8_t chipID = mySensor.chipID();

  Serial.print("chipID: ");

  Serial.println(chipID);

  if (! tmp006.begin()) 

  {

    Serial.println("No sensor found");

  }

  // Tentativa de conexão a Wi-Fi

  Serial.print("Tentando se conectar a: ");

  Serial.println(ssid); 

  // Connect to WPA/WPA2 network. Change this line if using open or WEP network:

  WiFi.begin(ssid, password);

  while ( WiFi.status() != WL_CONNECTED) {

    // print dots while we wait to connect

    Serial.print(".");

    delay(300);

  }

  Serial.println("\nVoce esta conectado a rede");

  Serial.println("Aguardando por um endereco IP");

  while (WiFi.localIP() == INADDR_NONE) {

    // enquanto não se conecta a rede

    Serial.print(".");

    delay(300);

  }

  Serial.println("\nEndereco IP obtido");

  printWifiStatus();

}

void loop() 

{

  GET();

  ReadData();

  TaurusUpdate();

  delay(10000);

}

void printWifiStatus() {

  // print the SSID of the network you're attached to:

  Serial.print("SSID: ");

  Serial.println(WiFi.SSID());

  // print your WiFi shield's IP address:

  IPAddress ip = WiFi.localIP();

  Serial.print("IP Address: ");

  Serial.println(ip);

  // print the received signal strength:

  long rssi = WiFi.RSSI();

  Serial.print("signal strength (RSSI):");

  Serial.print(rssi);

  Serial.println(" dBm");

}

void TaurusUpdate()

{

  Serial.println("\nConectando a Taurus......");

  // Se conectado, reporte na serial:

  if (client.connect(server, 80)) {

    Serial.println("Conectado");

    // Make a HTTP request:

    client.println(GETtoTaurus);

    client.println("Host: taurussystem.com");

    client.println("Connection: close");

    client.println();

    client.println();

  }

  while (client.available()) {

    char c = client.read(); //Resposta do servidor

    Serial.write(c);

  }

  // if the server's disconnected, stop the client:

  if (!client.connected()) 

  {

    Serial.println();

    Serial.println("Disconectando.");

    client.stop();

  }

}

void GET()

{

  String IDX = "2001";

  String IDY = "2002";

  String IDZ = "2003";

  String TempObj = "2004";

  String TempReal = "2005";

  GETtoTaurus = "GET /ws/webresources/SetSensor?key=YOURSERIAL&&load=("+IDX+","+x+"*"+IDY+","+y+"*"+IDZ+","+z+"*"+TempObj+","+objt+"*"+TempReal+","+diet+") HTTP/1.1"; 

  Serial.println(GETtoTaurus);

}

void ReadData()

{

  x = mySensor.readXData();

  Serial.print("X: ");

  Serial.print(x);

  y = mySensor.readYData();

  Serial.print(" Y: ");

  Serial.print(y);

  z = mySensor.readZData();

  Serial.print(" Z: ");

  Serial.println(z);

  tmp006.wake();

  objt = tmp006.readObjTempC();

  Serial.print("Object Temperature: "); 

  Serial.println(objt); 

  //Serial.println("*C");

  diet = tmp006.readDieTempC();

  Serial.print("Die Temperature: "); 

  Serial.println(diet); 

  //Serial.println("*C");

  delay(2000);

}