The recently released "Cybercore X1" by FILDZ Is a tiny Wi-Fi chip that might be a wonderful solution for developing small, WiFi-based projects. It is powered by the ESP8285 from Espressif.
Cybercore X1 is a super-compact Wi-Fi module that will provide your project WiFi power without taking up a lot of room. As the pre-loaded firmware gives you OTA options to wirelessly upload your own code, you can start fiddling with it straight away. Makers and hobbyists will adore this incredibly compact yet strong Wi-Fi module for applications that require a small footprint!
The preinstalled firmware on the Cybercore X1 lets you build an access point to which you may connect wirelessly. The Arduino IDEmakes it simple to programme in the C/C++ programming language, and anything you create is wirelessly updated through OTA.
With the help of the CYBERCORE X1 Breakout Board, you may quickly and simply utilize the Cybercore X1 on a variety of breadboards that support a 2, 54 mm pitch. The board and module will already be soldered together if you select this option. The breakout board does not have 2, 54 mm headers attached to it.
Additionally, the CYBERCORE X1 includes a development board. The little module is fantastic, and a breakout board is even nicer, but what if it included the whole socket for the CYBERCORE X1? Then you could just plug your CYBERCORE X1 into it and flash it!
CYBERCORE X1 Features & Specifications:- A Wi-Fi module half the size of a gummy bear - just 8.6 x 9.6 mm
- Powered by Espressif's ESP8285 highly integrated Wi-Fi SoC
- Integrated antenna for wireless programming
- Easily programmable using Arduino IDE OTA (Over-The-Air)
- Breadboard ready
- Plug-and-play socket for quick programming
- Memory: 1MB
- Connectivity: UART (RX/TX) and Wi-Fi for programming/flashing
- I/O: 13 GPIOs
- Power: 3.3V (up to 500mA)
- Dimensions: 8.6 mm x 9.6 mm x 1.8 mm, 1 gram
- PCB thickness: 0.8 mm
- Programming: Arduino IDE via UART or OTA (C/C++)
- Antenna range: up to 20 meters
CYBERCORE X1 is currently available on Indiegogostarting at 9$ including free shipping, FILDZ said they'll start shipping from February 2023.
Comments