Already have an account? Sign in
Using the MCP23017 IO Expander as an output device driving four Seven Segment Display blocks.
Short article about testing Mikroelektronika Ambient 2 click board on the Arduino 101 microcontroler
Team Makers NS
Build a beautiful “infinity mirror” Illusion that you can control by changing this mirrors' orientation. Rotate for changing colors!
teaches you how to use the piezo vibration sensor in the Arduino Grove starter kit.
Teaches you how to use the Stepper motor and driver in the Arduino Grove starter kit.
Control your IoT devices with Arduino 101, DFRobot LCD Keypad Shield and autonomous IoT communication via the IoT JumpWay.
A quick intro into to the IoT JumpWay. A Intel® Arduino 101 IoT Dev Kit LED example with IoT communication via the IoT JumpWay MQTT Library.
Teaches you how to use the LCD display in the Arduino Grove starter kit.
Set up your SD card and use it to boot the Edison, for this tutorial we recommend an 8 - 16gb SD.
Set up a basic device that allows control of an LED, and an application to communicate with the device and make the LED flash on and off.
IoT intruder alarm system on an Intel® Arduino 101 with DFRobot LCD Keypad Shield, connected to the IoT using the IoT JumpWay MQTT Library.
Work in progress
Ever want to punch a Mario block and get a mushroom to come out? Me too, so I'm building it.
A quick intro into to the IoT JumpWay. A Intel® Edison IoT Dev Kit LED example with IoT communication via the IoT JumpWay MQTT Library.
A quick intro into to the IoT JumpWay. A Intel® Edison IoT connected LED example with IoT communication via the IoT JumpWay MQTT Library.
Arduino 101 4WD rover and a wireless camera.
This project utilizes a combination of RFID, Load Cell Sensors, and connectivity through Arduino and Echo for an Amazon Based Smart Fridge
Use PubNub and the Intel Edison to turn your Arduino 101 project into a true IoT project.
This is a simple Intel Curie BLE discovery example. We will scan for Tile device. Based on RSSI we will change the color on WS2811 LEDs.
Tutorial for changing the name used by the FirmataBLE library and updating your Node.js libraries to connect with the new name.
This system measure the power consumption of appliances plugged in outlet and can control turn on/off of some appliances.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
Building robots shouldn't be hard or laborious. All you need is an Arduino 101 and a Sparkfun chassis.
Demonstrate Intel MRAA Support of the MCP23017 IO Expander as an Output Device. This project blinks 16 LEDs under control of ANSI C.
Generate a configurable alert bell by sending an HTTP GET request to an Ethernet-connected Arduino board with a MIDI synthesizer shield.
People are always going to age but technology will always be advancing so lets use the advancing technology to fight against aging bodies!
Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.
We help people save, time, money and lives using intelligent data analytics through IoT devices in residential and commercial properties!
Leverage Alexa, Raspberry Pi, Intel NUC, Honeywell Lyric, IBM Watson and Vegas Open Data to address the needs of residents and city staff
Team Three Hackers
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
OIKOS is a smart social-connected home for everyone. Our goal is to put the society in connection with homeless through IoT.
OIKOS NGO TEAM