Esp32-S2-Wroom and Relay

Story

Thanks again @PCBWay for sponsoring my project. PCBWay You can have your PCB boards produced for 10$. And it provides all kinds of printing and assembly services.

PCBWay: https://www.pcbway.com/

PCBWay+ my profile: https://www.pcbway.com/project/member/?bmbno=188E1A91-204D-49

When designing this card:

You can follow the steps below to design a PCB for the Esp32-S2-Wroom module and 5 relays:

First, you need to create an appropriately sized PCB design based on the dimensions of the Esp32-S2-Wroom module and the 5 relays. To create your PCB design, you can use a PCB design software. For example, you can use software like Eagle PCB, Altium Designer, KiCad or EasyEDA.

When designing your PCB, you need to choose a suitable size chassis for the Esp32-S2-Wroom module and 5 relays. This chassis will be used to fix the module and relays to your board.

You need to drill appropriately sized holes for the Esp32-S2-Wroom module and relays. These holes will be used to secure the module and relays to your PCB board.

In your PCB design, you need to create appropriately sized paths to connect the Esp32-S2-Wroom module and the relays. These paths will interconnect the GPIO pins of the module and relays, the power supply and other connections on your PCB board.

After you have completed your PCB design, you can contact a PCB manufacturer to have your PCB produc

ESP32-S2-Wroom-1 features. (Source: Datasheet. To reach: CLICK HERE)Project Purpose: This project aims to create a relay control system that can be controlled via internet connection, using Esp32-S2-Wroom and 5 relays. The project will provide a simple web interface to control the relays.

What is ESP32-S2-WROOM Module and What Does It Do?

ESP32-S2-WROOM is a microcontroller chipset that combines low power consumption and high performance. ESP32-S2-WROOM is an ideal choice for devices that want to establish a Wi-Fi connection. The module is equipped with a Tensilica Xtensa LX7 processor and has a 240 MHz installation speed.

Unlike traditional ESP32 modules, ESP32-S2-WROOM provides a built-in MAC and PHY for Wi-Fi connectivity. It also includes USB support and a low-cost chip antenna. The module is also equipped with 4 MB of internal flash memory and 8 KB of SRAM.

ESP32-S2-WROOM is especially ideal for devices requiring low power consumption. In sleep mode, it consumes only 20 µA of power. In addition, the advanced security features included in the module help to increase the security of the devices.

What are the ESP32-S2-WROOM Module Technical Specifications?

Processor:

Tensilica Xtensa LX7 processor

240 MHz plug-in speed

Memory:

4 MB internal flash memory

8KB SRAM

Wireless:

Wi-Fi 802.11 b/g/n/e/i

Built-in MAC and PHY

low cost chip antenna

Bluetooth 5.0

Strength:

low power consumption

20 µA power consumption in sleep mode

Security:

Advanced security features

WPA3-Enterprise encryption support

Links:

43 GPIO pins

1x SPI, 2x I2C, 2x UART, 12-bit ADC, 8-bit DAC

Dimension:

18mm x 31.4mm x 3.3mm

Where is the ESP32-S2-WROOM Module Used?

The ESP32-S2-WROOM module is an ideal solution for devices with Wi-Fi connectivity. It is especially suitable for devices that require low power consumption. The module can be used for smart home devices, industrial automation, smart agriculture, smart transportation and other IoT applications.

The module comes with advanced security features, so it's safe to use like industrial automation.

It is also a suitable option for critical applications. The module also comes with support for Bluetooth 5.0, so it can be used to develop Bluetooth-enabled devices as well.

The ESP32-S2-WROOM module has a smaller size compared to larger ESP32 modules. This allows for more compact designs of devices. In addition, the ESP32-S2-WROOM module reduces the cost of devices thanks to its low cost.

As a result, the ESP32-S2-WROOM module is an ideal solution for IoT applications, offering a combination of features such as low power consumption, high performance, advanced security features, Wi-Fi and Bluetooth support. Thanks to its small size and low cost, the module enables devices to be designed more compactly and costs are reduced.

The ESP32-S2-WROOM module also provides a USB interface. In this way, it facilitates the design of devices that can be connected to the computer. In addition, the wide pinout option on the module provides flexibility to the designers.

The hardware of the module is compatible with many peripherals. For example, the ADCs in the module can read many sensors such as capacitive touch sensors and magnetometers. In addition, thanks to the I2C, SPI and UART interfaces in the module, communication between different devices can be achieved.

The ESP32-S2-WROOM module also draws attention with its low power consumption feature. The module can throttle down to just 6 µA in low power consumption mode and only consumes up to 20 µA when dormant. This feature is ideal for battery powered devices.

Finally, the ESP32-S2-WROOM module offers many development tools and resources to streamline the development process for developers' IoT applications. Many development tools such as Arduino IDE, MicroPython, FreeRTOS are available for this module.

Offering all these features together, the ESP32-S2-WROOM module offers an ideal solution for IoT applications. Thanks to its features such as high performance, low power consumption, wide pinout option, Wi-Fi and Bluetooth support, affordable cost, the module can be used for the development of various devices.

The ESP32-S2-WROOM module is specifically designed for industrial IoT applications. Therefore, it is important that the module has a robust design and can operate in a wide temperature range. The module can operate at temperatures between -40°C and 105°C and thanks to this feature, it can be used in harsh industrial environments.

Also, the security features on the module are important. The module provides many security features such as hardware encryption, protection against DMA attacks, secure boot and cryptography. Thanks to these features, IoT applications can be made more secure.

The ESP32-S2-WROOM module comes with support for WiFi 4 and Bluetooth 5.0. Thanks to these features, the module offers high speed data transfer, low latency and wide coverage. In addition, the module supports single-channel and dual-channel WiFi modes.

In conclusion, the ESP32-S2-WROOM module is a multi-featured module designed for industrial IoT applications. Thanks to its features such as high performance, low power consumption, wide temperature range, security features, WiFi and Bluetooth support, the module can be used in the development of many IoT devices.

What is PCBWay:

PCBWAY is a professional Printed Circuit Board Manufacturer (PCB) company. Founded in 2003, the company was established to support its designers during the design and production stages.

PCBWAY provides versatile PCB design and manufacturing services for simple and complex projects. The quality, speed and reasonable prices of their products work to help meet their customers' needs.

The most important features of PCBWAY are:

1. PCB Design Support: PCBWAY offers designers professional design support to help you realize your design.

2. Low Prices: PCBWAY offers lower prices compared to its competitors and offers its customers the best price-performance ratio.

3. Fast Production: PCBWAY offers fast production times to meet customers' expectations.

4. Quality Products: PCBWAY takes care to comply with the highest quality standards during the production phase and offers its customers the best quality products.

5. Global Supplier: PCBWAY serves many customers around the world and provides fast and reliable service to customers in different geographical regions.

PCBWAY is a reliable and professional option providing professional PCB services for your electronics projects. As a company that appeals to everyone from beginner level designers to professionals, it distinguishes itself from other competitors with the quality, speed and price advantages of its products.

How to order?

The process of ordering a printed circuit on PCBWAY consists of these steps:

1. Registration: To become a member of PCBWAY, go to https://www.pcbway.com and click "Register". Fill in your e-mail address, password and other necessary information to become a member.

2. Design Upload: Click "Order" of PCBWAY and upload your design files. Files should be like Gerber files, BOM file, design file.

3. Order Customization: Fill in the order form and choose customization options, for example PCB thickness, color, coating etc.

4. Payment: Pay after confirming your order. PCBWAY offers many payment methods such as credit card, PayPal, bank transfer.

5. Production and Delivery: Once your order is confirmed, PCBWAY goes into production and is prepared for delivery. You can always observe your order status and get information about the production process.

PCBWAY offers an easy and fast ordering process and strives to provide the best service to its customers. At the end of the ordering process, PCBWAY will work to deliver your products as soon as possible and with the highest quality