Aditya Gupta
Published © GPL3+

LDR-Based Intruder Detection System

A fully IoT-based system that will notify via message in case you have an intruder in your home.

IntermediateFull instructions provided2 hours799
LDR-Based Intruder Detection System

Things used in this project

Hardware components

LDR, 5 Mohm
LDR, 5 Mohm
×1
Bolt WiFi Module
Bolt IoT Bolt WiFi Module
×1
Resistor 10k ohm
Resistor 10k ohm
×1
USB-A to Mini-USB Cable
USB-A to Mini-USB Cable
×1

Software apps and online services

SMS Messaging API
Twilio SMS Messaging API
Windows 10
Microsoft Windows 10
Bolt Cloud
Bolt IoT Bolt Cloud

Story

Read more

Schematics

main circuite

Code

config.py

Python
SID = 'You can find SID in your Twilio Dashboard' 
AUTH_TOKEN = 'You can find  on your Twilio Dashboard' 
FROM_NUMBER = 'This is the no. generated by Twilio. You can find this on your Twilio Dashboard'
TO_NUMBER = 'This is your number. Make sure you are adding +91 in beginning'
API_KEY = 'This is your Bolt Cloud accout API key'
DEVICE_ID = 'This is the ID of your Bolt device' 

main.py

Python
import conf, json, time, math, statistics
from boltiot import Sms, Bolt
def compute_bounds(history_data,frame_size,factor):
    if len(history_data)<frame_size :
        return None

    if len(history_data)>frame_size :
        del history_data[0:len(history_data)-frame_size]
    Mn=statistics.mean(history_data)
    Variance=0
    for data in history_data :
        Variance += math.pow((data-Mn),2)
    Zn = factor * math.sqrt(Variance / frame_size)
    High_bound = history_data[frame_size-1]+Zn
    Low_bound = history_data[frame_size-1]-Zn
    return [High_bound,Low_bound]

mybolt = Bolt(conf.API_KEY, conf.DEVICE_ID)
sms = Sms(conf.SSID, conf.AUTH_TOKEN, conf.TO_NUMBER, conf.FROM_NUMBER)
history_data=[]

while True:
    response = mybolt.analogRead('A0')
    data = json.loads(response)
    if data['success'] != 1:
        print("There was an error while retriving the data.")
        print("This is the error:"+data['value'])
        time.sleep(10)
        continue

    print ("This is the value "+data['value'])
    sensor_value=0
    try:
        sensor_value = int(data['value'])
    except e:
        print("There was an error while parsing the response: ",e)
        continue

    bound = compute_bounds(history_data,conf.FRAME_SIZE,conf.MUL_FACTOR)
    if not bound:
        required_data_count=conf.FRAME_SIZE-len(history_data)
        print("Not enough data to compute Z-score. Need ",required_data_count," more data points")
        history_data.append(int(data['value']))
        time.sleep(10)
        continue

    try:
        if sensor_value > bound[0] :
            print ("The light level increased suddenly. Sending an SMS.")
            response = sms.send_sms("Someone turned on the lights")
            print("This is the response ",response)
        elif sensor_value < bound[1]:
            print ("The light level decreased suddenly. Sending an SMS.")
            response = sms.send_sms("Someone turned off the lights")
            print("This is the response ",response)
        history_data.append(sensor_value);
    except Exception as e:
        print ("Error",e)
    time.sleep(10)

Credits

Aditya Gupta
1 project • 2 followers

Comments