Things used in this project

Hardware components:
Atmel ATmega328P
160 20
16 MHz Crystal
Kemet c315c220k1g5ta image
Capacitor 22 pF
Kemet c320c104k5r5ta image
Capacitor 100 nF
09590 01
LED (generic)
Stmicroelectronics l7805cv image
Linear Regulator (7805)
Panasonic eca1hm2r2
Capacitor 10 µF
Fairchild semiconductor 1n4004. image
1N4007 – High Voltage, High Current Rated Diode
Mfr 25frf52 10k sml
Resistor 10k ohm
Mfr 25frf52 1k sml
Resistor 1k ohm
Omron b3f 1000 image 75px
SparkFun Pushbutton switch 12mm
Software apps and online services:
Ide web
Arduino Arduino IDE
Hand tools and fabrication machines:
09507 01
Soldering iron (generic)


Franzino - Ealge Schematic
Franzino 01 1068x712 4thregufbi
Franzino - TOP View
Franzino 002 exagrnjtug
Franzino - Ealge Board
Franzino 03 nepo4s5hz7
USB/Serial Connection
Franzino 04 901x420 xp4aki8rhr




Perfil banner embarcados uiua4wmzpy
Fabio Souza

Engineer, maker and diy enthusiast.



Did you replicate this project? Share it!

I made one

Love this project? Think it could be improved? Tell us what you think!

Give feedback


Similar projects you might like

Arduino Amiga Floppy Disk Reader
  • 2,178
  • 5

Work in progress

An Arduino powered floppy disk controller and reader for making disk images from old AmigaDOS floppy disks.

Micro:bit Moisture sensor
  • 155
  • 4


In this quick and easy project, you build a micro:bit moisture sensor

3D-Printed, Internet-Controlled, Self-Balancing FPV Robot
  • 1,612
  • 22

Full instructions

Open source telepresence robot that keeps its balance on two wheels. Controlled from UI in the web browser.

Connect Your ESP8266 to Any Available Wi-Fi Network
  • 1,804
  • 17

Full instructions

Establish an Access Point that connects your ESP8266 module to any network making a universal firmware that can be used anywhere.

Interactive European Monuments Board
  • 167
  • 2

Work in progress

3D-printed monumets of Europe, a Raspberry Pi and Makey Makey. Can be connected to any screen and speakers.

My First Arduino 101 Car Controlled by BLE
  • 562
  • 4

Full instructions

Recently I received an Arduino 101 kit from Hackster. My joy was great because it had a lot to do new projects!

ProjectsCommunitiesTopicsContestsLiveAppsBetaFree StoreBlogAdd projectSign up / Login