nanoFramework Tiny Rain Maker Irrigation Controller

How to use Tiny Rain Maker

• Setup nanoFramework https://docs.nanoframework.net/content/getting-started-guides/index.html
• Compile the source code to an Espressif ESP32 dev c board
• Design your PCB board using the provided schematic https://github.com/Dweaver309/TRM/blob/master/DesignFiles/Schematic/TRMSchematic.pdf or simply use the provided qerber files https://github.com/Dweaver309/TRM/tree/master/DesignFiles/Gerber
• Order the componets needed using the BOM provided https://github.com/Dweaver309/TRM/blob/master/DesignFiles/BOM/BOM_PartType-Irrigation%20Controller.xls
• After building the board connect one end of each solenoid to 1 thru 4 and the other end to Comm. Next connect a 24 volt power supply to the negative and positive connections.
• Type the IP address displayed on the screen into any browser to connect. This is an example of the default.html https://github.com/Dweaver309/TRM/blob/master/DesignFiles/Images/default.PNG
• Use the settings screen to have the Tiny Rain Maker automatically run each day. https://github.com/Dweaver309/TRM/blob/master/DesignFiles/Images/settings.PNG