Overview
Things
Story
Schematics
Credits
Comments(8)

raul

Published March 25, 2019 © GPL3+

Microcontrollers Lab

This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.

IntermediateFull instructions provided4 hours15,906

Microcontrollers Lab

Things used in this project

Hardware components

FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth)

DFRobot FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth)

×

1

Arduino Nano R3

Arduino Nano R3

×

1

PIC18F

Microchip PIC18F

×

1

Pmod RS485

Digilent Pmod RS485

×

1

Analog Accelerometer: ADXL335

Adafruit Analog Accelerometer: ADXL335

×

1

IR receiver (generic)

×

1

Buzzer

Buzzer

×

1

RGB Diffused Common Cathode

RGB Diffused Common Cathode

×

1

SparkFun 7-Segment Serial Display - Red

SparkFun 7-Segment Serial Display - Red

×

2

5 mm LED: Red

5 mm LED: Red

×

7

5 mm LED: Yellow

5 mm LED: Yellow

×

6

Ultrasonic Sensor - HC-SR04 (Generic)

Ultrasonic Sensor - HC-SR04 (Generic)

×

1

Story

An easy way for practice with microcontrollers (sorry I dont speak English).

Elements:

ESP32 WiFI and BLE microcontroller
Arduino Nano
PIC18F2550
5V power source
RS485 driver
Buzzer
IR Receiver
ADXL335 gyroscope
RGB LED
Two 4-digit LED tubes
HC-SR04 ultrasonic sensor
13 LEDs
Expansion sockets

1 / 4

Thank you!

Schematics

Credits

raul

raul

2 projects • 18 followers

ingeniero electronico

Comments