Please ensure that JavaScript is enabled in your browser to use this page.
Total prize pool of $3,000+
All projects in Education (38)
Small, cheap, low-powered sensors are still a challenge to make. LoRa-Tooth uses $6 BLE modules to make untethered sensors with long range.
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
Graphical Systems Design approach to controlling the Renaissance Robotics eduMIP with LabVIEW
This project will show how to use your OpenScope MZ in LabVIEW.
This project allows anyone to turn a Raspberry Pi into a universal remote using LIRC (LINUX Infrared Remote Control).
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
This guide will show you how to make a physical interface for LabVIEW.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.
This project allows you to control a fan and a servo over WiFi with LabVIEW.
This tutorial will teach you how to use Digilent's Pmod interfaces in LabVIEW.
How to make a homemade electrocardiograph (ECG).