Raspberry pi 2 mechanical switches shield

Building the Shield:

Materials:

6x 10 Ohm Resistors.

6x Mechanical keyboard switches.

1x Raspberry Pi 2B

40x Generic pins. (Skip this part if your board has pins)

Steps:

1- Solder the resistors to the resistor sockets located on the sides of the shield

2- Solder the Switches to the sockets

3- Program the board.

If you would like to download the Gerber or order the board, feel free to visit the project on pcbway:

https://www.pcbway.com/project/shareproject/Raspberry_Pi_2_mechanic_switches_shield_6a95dff7.html