circuito.io team
Published © GPL3+

Dancing Robot

For this little guy, you'll need to purchase a simple push-up toy. Make sure to adjust the 3D-printed parts.

BeginnerShowcase (no instructions)3 hours2,054

Things used in this project

Hardware components

SparkFun Electronics Resistor Kit - 1/4W (500 total)
×1
SparkFun Electronics SparkFun Capacitor Kit
×1
Arduino UNO
Arduino UNO
×1
SparkFun Electronics Servo - Generic Metal Gear (Micro Size)
×1
SparkFun Electronics Wall Adapter Power Supply - 12VDC 600mA
×1
SparkFun Electronics USB Cable A to B - 6 Foot
×1
SparkFun Electronics Jumper Wires Standard 7" M/M - 30 AWG (30 Pack)
×1
SparkFun Electronics Heatsink TO-220
×1
SparkFun Electronics Breadboard - Full-Size (Bare)
×1
SparkFun Electronics Jumper Wires - Connected 6" (M/F, 20 pack)
×1
SparkFun Electronics Flex Sensor 4.5"
×1
SparkFun Electronics Voltage Regulator - 5V
×1
SparkFun Electronics Capacitor Ceramic 0.1uF
×1

Software apps and online services

https://circuito.io/

Hand tools and fabrication machines

3D Printer (generic)
3D Printer (generic)

Custom parts and enclosures

Dancing Robot assembly

Before printing these parts, make sure that they are suitable for the size of the push-up toy you chose to use.

fin8okwimnqophi_LOr5ZGHPh3.sldprt

f7f7b83imnqophk_xCUog1GZ0W.sldprt

f3cw789imnqophp_pUEnQ3nuoQ.sldprt

Schematics

Dancing Robot schematics

Credits

circuito.io team
29 projects • 608 followers
Circuito.io is an online platform that generates wiring and code for Arduino projects. Want to know more? Visit http://circuito.io

Comments

Related channels and tags
  • SparkFun Electronics