Find out whyClose
$45 Copyscope DIY | HTME: Practical
Andy shows you how to make a functional telescope from an old copier lens, a mirror, some Jeweler's loops and pvc pipe.
Published on May 2, 2017
|| MAKE YOUR OWN WITH THIS SHOPPING LIST || 3 in. x 1-1/2 in. PVC DWV Reducing Coupling http://go.magik.ly/ml/4vg7/
Loctite 0.14 fl. oz. Ultra Liquid Control Super Glue http://go.magik.ly/ml/4vg8/
1-1/4 in. PVC Sch. 40 S x S x S Tee http://go.magik.ly/ml/4vga/
3 in. x 4 in. PVC DWV Hub x Sewer and Drain Soil Pipe Adapter http://go.magik.ly/ml/4vgb/
Rust-Oleum Painter's Touch 2X 12 oz. Flat Black General Purpose Spray Paint http://go.magik.ly/ml/4vgc/
1-1/4 in. PVC Sch. 40 S x S Coupling http://go.magik.ly/ml/4vgd/
1-1/2 in. PVC DWV Hub x FIPT Female Adapter http://go.magik.ly/ml/4vge/
1-1/2 in. PVC DWV Coupling http://go.magik.ly/ml/4vgh/
1-1/4 in. x 2 ft. PVC Sch. 40 Pipe http://go.magik.ly/ml/4vgf/
Paylak LP47995 Watchmakers Set of 5 Eye Loupe http://go.magik.ly/ml/4vgg/
Fujinon/Xerox copier lens F4.5 3” diameter. Can often be found at surplus supply stores - Just use this link for reference. http://ebay.to/2pCL0L2
Small Mirror
Comments